东北大学学报(自然科学版) ›› 2024, Vol. 45 ›› Issue (2): 276-281.DOI: 10.12068/j.issn.1005-3026.2024.02.016
• 资源与土木工程 • 上一篇
李刚, 周雷, 张晓宇, 张凯
Gang LI, Lei ZHOU, Xiao-yu ZHANG, Kai ZHANG
摘要:
国内外相关标准提供了单体设备的泄压面积计算方法,但连通设备的准则尚属空白.通过FLACS数值模拟,以玉米淀粉为爆炸介质,探究了连通设备内的泄爆压力和压力上升速率.结果表明:当管道长度一定时,传爆容器内最大泄爆压力随泄压面积增加而降低;在设置相同泄压面积时,传爆容器内的最大泄爆压力随管道长度的增长而增大,且达到最大泄爆压力的时间也随之延后;传爆容器所需最小安全泄压面积大于同等大小单体设备的泄压面积,说明现有单体设备的泄压面积计算方法对于连通设备不适用.通过数值拟合,对标准中单体设备的泄压面积计算公式进行修正,使其满足连通设备安全泄压要求. 研究结果为连通系统的防爆设计提供参考和依据.
中图分类号: