东北大学学报(自然科学版) ›› 2006, Vol. 27 ›› Issue (5): 497-500.DOI: -

• 论著 • 上一篇    下一篇

大方坯连铸跨结晶器电磁搅拌的数值模拟

李建超;崔建忠;王宝峰;麻永林;   

  1. 东北大学材料电磁过程教育部重点实验室;东北大学材料电磁过程教育部重点实验室;内蒙古科技大学材料学院;内蒙古科技大学材料学院 辽宁沈阳110004;辽宁沈阳110004;内蒙古包头014010;内蒙古包头014010
  • 收稿日期:2013-06-23 修回日期:2013-06-23 出版日期:2006-05-15 发布日期:2013-06-23
  • 通讯作者: Li, J.-C.
  • 作者简介:-
  • 基金资助:
    国家重点基础研究发展规划项目(2005CB623707)

Numerical simulation of M-EMS for bloom continuous casting

Li, Jian-Chao (1); Cui, Jian-Zhong (1); Wang, Bao-Feng (2); Ma, Yong-Lin (2)   

  1. (1) Key Laboratory of Electromagnetic Processing of Materials, Northeastern University, Shenyang 110004, China; (2) School of Materials, Inner Mongolia University of Science and Technology, Baotou 014010, China
  • Received:2013-06-23 Revised:2013-06-23 Online:2006-05-15 Published:2013-06-23
  • Contact: Li, J.-C.
  • About author:-
  • Supported by:
    -

摘要: 借助有限元分析软件ANSYS,在电流为600A,频率为2Hz条件下,对大方坯跨结晶器电磁搅拌进行了数值分析·实验结果和模拟结果对比表明,试验结果和数值模拟结果基本相符·重点分析了不同的电流和频率下,铸坯中心磁场强度和节点电磁力的变化规律,结果表明:铸坯中心磁场强度、节点电磁力随电流增大而增加,也随频率增加而增加,在8Hz时达到最大值·

关键词: 数值模拟, 结晶器, 电磁搅拌(M-EMS), 大方坯

Abstract: A numerical simulation was conducted at 600 A/2 Hz for the M-EMS behavior of a bloom during continuous casting by virtue of the FEA software ANSYS. The comparison showed that the calculated results conform basically with the experimental data. Discusses emphatically the relationship between the magnetic filed induction or node magnetic force at the centre of bloom and the changing current/frequency. The results show both magnetic induction and node magnetic force at the centre of bloom increase with the current also the frequency, of which the maximum value is found at 8 Hz.

中图分类号: