含锡不锈钢溶质偏析模型计算

doi:10.12068/j.issn.1005-3026.2015.04.011

东北大学学报:自然科学版 ›› 2015, Vol. 36 ›› Issue (4): 502-507.DOI: 10.12068/j.issn.1005-3026.2015.04.011

含锡不锈钢溶质偏析模型计算

李阳，韩纪鹏，姜周华，何盼

(东北大学材料与冶金学院，辽宁沈阳110819)

收稿日期:2014-04-23 修回日期:2014-04-23 出版日期:2015-04-15 发布日期:2014-11-07
通讯作者: 李阳
作者简介:李阳(1973-)，男，辽宁鞍山人，东北大学副教授; 姜周华(1963-)，男，浙江萧山人，东北大学教授，博士生导师.
基金资助:
国家科技支撑计划项目(2012BAE04B02)；中央高校基本科研业务费专项资金资助项目(N130402009)；辽宁省自然科学基金资助项目(2014020032)；辽宁省高校创新团队支持计划项目.

Micro-segregation of Solutes in Tin-Containing Ferritic Stainless Steel

LI Yang， HAN Ji-peng， JIANG Zhou-hua， HE Pan

School of Materials & Metallurgy， Northeastern University， Shenyang 110819， China.

Received:2014-04-23 Revised:2014-04-23 Online:2015-04-15 Published:2014-11-07
Contact: HAN Ji-peng
About author:-
Supported by:
-

摘要/Abstract

摘要： 结合微观偏析模型及Thermo-calc软件，考虑了MnS的析出，用微观偏析理论研究了含锡铁素体不锈钢中溶质的偏析行为.主要讨论了铁素体不锈钢中C，Mn，S，P，Cr在凝固过程中的偏析程度，研究了溶质偏析对零强度温度(ZST)、零塑形温度(ZDT)的影响规律.分析了锡在铁素体钢和低碳钢中偏析行为的差异，解释了低碳钢的热加工塑形凹槽现象，理论分析了微量元素对热塑性的影响.结果表明，Sn的凝固偏析比远大于除P，S外的其他元素，Mn对S元素凝固偏析有抑制作用.锡为易偏析元素，其在奥氏体相中的凝固偏析比大于在铁素体相中的偏析比.

关键词: 锡, 铁素体不锈钢, 微观偏析, 偏析比, 内裂纹

Abstract: Combined a micro-segregation model with Thermao-calc software， the segregation condition of tin-containing ferritic stainless steel was studied in which the precipitation of MnS was considered. The effects of C， Mn， S， P， and Cr on the interdendritic segregation， zero strength temperature (ZST)， and zero ductility temperature (ZDT) of steel were discussed. The segregation of tin in ferritic steel and low-carbon steel was analyzed， the plastic trough phenomenon in the hot-working process of low-carbon steel was explained and the improvement of plasticity by adding tin was studied. The results showed that the segregation ratio of Sn is much higher than that of other elements except for P and S， and Mn restrains the solidification segregation of S. Tin trends to segregate to grain boundary and the segregation ratio of tin in austenite is much higher than that in ferrite.

Key words: tin, ferritic stainless steel, micro-segregation, segregation ratio, internal crack

中图分类号:

TF02

李阳，韩纪鹏，姜周华，何盼. 含锡不锈钢溶质偏析模型计算[J]. 东北大学学报:自然科学版, 2015, 36(4): 502-507.

LI Yang， HAN Ji-peng， JIANG Zhou-hua， HE Pan. Micro-segregation of Solutes in Tin-Containing Ferritic Stainless Steel[J]. Journal of Northeastern University Natural Science, 2015, 36(4): 502-507.

参考文献

[1]Kim K，Yeo T，Oh K H，et al.Effect of carbon and sulfur in continuously cast strand on longitudinal surface cracks［J］.ISIJ International， 1996，36(3):284-294.
[2]Himemiya T，Umeda T.Solute redistribution model of dendritic solidification considering diffusion in both the liquid and solid phase ［J］.ISIJ International， 1998，38(7):730-741.
[3]Won Y M，Thomas B G.Simple model of micro-segregation during solidification of steels ［J］.Metallurgical and Materials Transactions A，2001，32(7):1755-1769.
[4]Liu Z Z，Wei J，Cai K K.A coupled mathematical model of micro-segregation and inclusion precipitation during solidification of silicon steel ［J］.ISIJ International，2002，42(9):958-963.
[5]Nagasaki C，Kihara J.Effect of copper and tin on hot ductility of ultra-low and 0.2% carbon steels［J］.ISIJ International，1997，37(5):523-530.
[6]Seol D J，Won Y M，Oh K H，et al.Mechanical behavior of carbon steels in the temperature range of mushy zone ［J］.ISIJ International，2000，40(4):356-363.
[7]Bleck W，Dahl W，Picht G，et al.Chemistry effects on the crack susceptibility of structural steels during continuous casting ［J］.Steel Research，2001，72(11/12):496-507.
[8]Stefanescu D M.Microstructure evolution during the solidification of steel ［J］. ISIJ International， 2006，46(6):786-794.(上接第501页)
[5]Otomo T，Takasaki Y，Kawaguchi T.Properties of core ore in quasi-particles required for large amounts usage of limonitic ores in iron ore sintering process［J］. ISIJ International，2005，45(4):532-537.
[6]Loo C E.A perspective of goethite ore sintering fundamentals［J］.ISIJ International，2005，45(4):436-448.
[7]Wu S L，EikiI K，Yasuo O.Effect of the constitution of granules on coalescing phenomenon and strength after sintering［C］ // Proceedings of the 6th International Iron and Steel Congress.Nagoya: ISIJ，1990:15-20.
[8]Eiki K，Wu S L，Yasuo O.Influence of property of iron ores on the coalescing phenomenon of granules during sintering［J］.Tetsu-to-Hagana，1991，77(1):56-61.
[9]Yukihiro H，Jun O，Kaoru I.Effect of mineralogical properties of iron ore on its assimilation with lime ［J］.Tetsu-to-Hagane，1992，78(7):1013-1018.

[1]	刘后龙，刘玲玲，李兴，陈礼清. 冷轧工艺对铁素体不锈钢成形性能的影响[J]. 东北大学学报:自然科学版, 2019, 40(8): 1099-1104.
[2]	周文涛，韩跃新，李艳军，杨金林. 基于Matlab和粒子群算法的磨矿技术效率预测模型[J]. 东北大学学报:自然科学版, 2019, 40(4): 548-552.
[3]	宫贵臣，韩跃新，刘杰，朱一民. 油酸钠在锡石(211)表面吸附的量子化学研究[J]. 东北大学学报:自然科学版, 2018, 39(5): 684-688.
[4]	杨建广，陈冰，雷杰，李树超. 废弃电路板铜锡多金属粉隔膜电积回收锡实验研究[J]. 东北大学学报:自然科学版, 2017, 38(11): 1648-1653.
[5]	刘越，陈超，吕文玲. 离心铸造高铅锡青铜合金摩擦磨损性能研究[J]. 东北大学学报:自然科学版, 2016, 37(3): 338-342.
[6]	高飞，刘振宇，于福晓. 超纯铁素体不锈钢热变形过程中的析出行为[J]. 东北大学学报:自然科学版, 2016, 37(1): 44-48.
[7]	刘越，陈超，齐占军，吕文玲. PbS对高铅锡青铜合金离心铸造微观组织的影响[J]. 东北大学学报:自然科学版, 2015, 36(4): 512-516.
[8]	解琼，史培阳，姜茂发. 铁素体不锈钢在盐酸溶液中的腐蚀过程[J]. 东北大学学报:自然科学版, 2015, 36(1): 38-42.
[9]	韩纪鹏，李阳，姜周华，方勇. 含锡铁素体不锈钢的开发及性能研究[J]. 东北大学学报:自然科学版, 2014, 35(9): 1275-1278.
[10]	张向军，沈鑫珺，张淑敏，刘振宇. 晶粒尺寸对含铜锡中铬铁素体不锈钢耐蚀性的影响[J]. 东北大学学报:自然科学版, 2014, 35(8): 1124-1127.
[11]	韩纪鹏，姜周华. 含锡铁素体不锈钢夹杂物的冶金行为[J]. 东北大学学报:自然科学版, 2014, 35(5): 700-703.
[12]	李晓亮，史培阳，岳莹莹，姜茂发. 盐酸浓度对热轧不锈钢酸洗板表面质量的影响[J]. 东北大学学报:自然科学版, 2014, 35(11): 1548-1550.
[13]	岳莹莹，刘承军，史培阳，姜茂发. 铁素体不锈钢在盐酸溶液中的缓蚀行为控制[J]. 东北大学学报:自然科学版, 2014, 35(11): 1556-1559.
[14]	李兵虎，刘常升，唐钢锋，贾瑜. 镀锡溶液中添加剂含量测定的新方法[J]. 东北大学学报:自然科学版, 2014, 35(10): 1432-1436.
[15]	李志强;袁磊;刘涛;于景坤;. IF钢凝固过程中Al_2O_3-TiN复合夹杂物的形成机理[J]. 东北大学学报(自然科学版), 2012, 33(9): 1294-1298.

含锡不锈钢溶质偏析模型计算

Micro-segregation of Solutes in Tin-Containing Ferritic Stainless Steel

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价