LI Yang-long， CHENG Shu-sen， CHEN Chuan. Mathematical Model of Adjusting Blast Volume of Blast Furnace Tuyeres[J]. Journal of Northeastern University Natural Science, 2016, 37(3): 357-362.
[1]Sasaki K，Hatano M，Watanabe M，et al.Investigation of quenched No.2 blast furnace at Kokura works［J］.Tetsu-to-Hagane，1976，62(5):580-591. [2]吴狄峰，程树森，赵宏博，等．风口尺寸对高炉操作影响的研究［J］．钢铁，2008，43(4):18-23．(Wu Di-feng，Cheng Shu-sen，Zhao Hong-bo，et al.Study on effect of tuyere size on blast furnace operation［J］.Iron and Steel，2008，43(4):18-23.) [3]陈辉，张卫东，马泽军，等．高炉送风系统压力损失的理论解析［J］．钢铁，2011，46(2):22-25．(Chen Hui，Zhang Wei-dong，Ma Ze-jun，et al.Theoretical analysis on pressure loss in blast system of BF［J］.Iron and Steel，2011，46(2):22-25.) [4]王晓鸣，李强，邹宗树，等．利用壅塞原理均匀分配高炉各风口的喷煤量［J］．东北大学学报(自然科学版)，2006，27(9):999-1002．(Wang Xiao-ming，Li Qiang，Zou Zong-shu，et al.Uniformly distributed mass flow rate of PCI into BF tuyeres on formation principle of choking［J］.Journal of Northeastern University( Natural Science)，2006，27(9):999-1002.) [5]Natsui S，Ueda S，Nogami H，et al.Analysis on non-uniform gas flow in blast furnace based on DEM-CFD combined model［J］.Steel Research International，2011，82(8):964-971. [6]Natsui S，Ueda S，Oikawa M，et al.Optimization of physical parameters of discrete element method for blast furnace and its application to the analysis on solid motion around raceway［J］.ISIJ International，2009，49(9):1308-1315. [7]Umekage T，Kadowaki M，Yuu S.Numerical simulation of effect of tuyere angle and wall scaffolding on unsteady gas and particle flows including raceway in blast furnace［J］.ISIJ International，2007，47(5):659-668. [8]Guo J，Cheng S S，Zhao H B，et al.A mechanism model for raceway formation and variation in a blast furnace［J］.Metallurgical and Materials Transactions B，2013，44(6):487-494. [9]Gupta G S，Rudolph V.Comparison of blast furnace raceway size with theory［J］.ISIJ International，2006，46(2):195-201. [10]项钟庸，王筱留．高炉设计-炼铁工艺设计理论与实践［M］．北京:冶金工业出版社，2007:171-172．(Xiang Zhong-yong，Wang Xiao-liu.Blast furnace design- theory and practice of ironmaking process design［M］.Beijing:Metallurgical Industry Press，2007:171-172.)
