Application of Isolation Piles on Metro Tunnel for Side-Crossing the Buildings with Shallow Foundation
JI Xin-bo1, ZHAO Wen1, LI Shen-gang1, ZHOU Zuo-shun2
1. School of Resources & Civil Engineering, Northeastern University, Shenyang 110819, China; 2. Tianjin Municipal Engineering Design and Research Institute, Tianjin 300051, China.
JI Xin-bo, ZHAO Wen, LI Shen-gang, ZHOU Zuo-shun. Application of Isolation Piles on Metro Tunnel for Side-Crossing the Buildings with Shallow Foundation[J]. Journal of Northeastern University:Natural Science, 2013, 34(1): 135-139.
[1]Azadia M,Hosseini S M M.Analyses of the effect of seismic behavior of shallow tunnels in liquefiable grounds[J].Tunnelling and Underground Space Technology,2010,25(5):543-552. [2]Chehade F H,Shahrour I.Numerical analysis of the interaction between twin-tunnels:influence of the relative position and construction procedure[J].Tunnelling and Underground Space Technology,2008,23(2):210-214. [3]Valazadeh K A,Sadaghini M H,Ahmadi M M.Numerical modeling of ground settlement control of large span underground metro station in Tehran Metro using central beam column(CBC) structure[J].Tunnelling and Underground Space Technology,2012,27(1):1-9. [4]Chen C N,Huang W Y,Tseng C T.Stress redistribution and ground arch development during tunneling[J].Tunnelling and Underground Space Technology,2011,26(1):228-235. [5]Dimmock P S,Mair R J.Effect of building stiffness on tunneling-induced ground movement[J].Tunnelling and Underground Space Technology,2008,23(4):438-450. [6]Nvlt O,Prívara S,Ferkl L.Probabilistic risk assessment of highway tunnels[J].Tunnelling and Underground Space Technology,2011,26(1):71-82. [7]李淑,张顶立,李志佳.北京地铁浅埋暗挖区间隧道塌陷机理[J].北京交通大学学报,2012,36(1):24-28.(Li Shu,Zhang Ding-1i,Li Zhi-jia.Study on mechanism of collapse based on shallow buried subway tunnel of Beijing[J].Journal of Beijing Jiaotong University,2012,36(1):24-28.) [8]胡斌,刘永林,唐辉明,等.武汉地铁虎泉—名都区间隧道开挖引起的地表沉降研究[J].岩石力学与工程学报,2012,31(5):908-913.(Hu Bin,Liu Yong-lin,Tang Hui-ming,et al.Research on ground subsidence due to tunnel excavation in Huquan─Mingdu section of Wuhan subway[J].Chinese Journal of Rock Mechanics and Engineering,2012,31(5):908-913.) [9]Osman A S.Stability of unlined twin tunnels in undrained clay[J].Tunnelling and Underground Space Technology,2010,25(3):290-296.(上接第134页)(Yu Jin-wang,Song Zheng-hua,Yang Zheng-ping,et al.Application research of desaltpetre technique by SCR process in coal-fired boiler[J].China Environmental Protection Industry,2009(1):24-26.) [2]Anupam S.Lessons learned from SCR experience of coal fired units in Japan,Europe and USA[C]//2002 Conference on SCR and Non-catalytic Reduction for NO○x Control.Washington DC,2002:15-16. [3]Andreasen J,Laursen J K,Bendixen O R.SNOX plant in full-scale operation[J].Modern Power Systems,1992(4):57-60. [4]郝吉明.国内外烟气脱硫技术发展现状及各种技术的利弊[C]//中国环境保护产业协会环保产业国际研讨会.北京,2003:86-87.(Hao Ji-ming.Development of flue gas desulphurization technology at home and abroad and the pros and cons of various technologies[C]//China’s Environmental Protection Industry Association International Conference on Environmental Protection Industry.Beijing,2003:86-87.) [5]Shimizu K,Maeshima H,Satsuma A,et al.Transition metal-aluminate catalysts for NO reduction by C3H6[J].Applied Catalysis B:Environmental,1998,18(1/2):163-170. [6]Chen L,Horiuchi T,Osaki T,et al.Catalytic selective reduction of NO with propylene over Cu/Al2O3 catalysts:influence of catalyst preparation method[J].Applied Catalysis B:Environmental,1999,23(4):259-269. [7]陶跃武,凌云,钟顺和.V2O5-MoO3-SiO2表面复合氧化物催化剂的制备与表征[J].催化学报,1999,20(2):129-133.(Tao Yue-wu,Ling Yun,Zhong Shun-he.Preparation and characterization of V2O5-MoO3-SiO2 surface compound catalysts[J].Journal of Catalytic,1999,20(2):129-133.) [8]Grzybowska-Swierkosz B.Active centres on vanadia-based catalysts for selective oxidation of hydrocarbons[J].Applied Catalysis A:General,1997,157(1/2):409-420. [9]郭振兵.SO2氧化制硫酸国产铯催化剂的研制与效果[J].硫磷设计与粉体工程,2003(6):12-23.(Guo Zhen-bing.Development and effect of cesium catalyst made in China in the sulfuric acid production by SO2 oxidation[J].Sulphur Phosphorous Design and Powder Engineering,2003(6):12-23.)