Journal of Northeastern University ›› 2013, Vol. 34 ›› Issue (4): 545-549.DOI: -

• Materials & Metallurgy • Previous Articles     Next Articles

Preparation of Oxidized Pellets with High Chromium VanadiumTitanium Magnetite

TANG Jue, ZHANG Yong, CHU Mansheng, XUE Xiangxin   

  1. School of Materials & Metallurgy, Northeastern University, Shenyang 110819, China.
  • Received:2012-01-20 Revised:2012-01-20 Online:2013-04-15 Published:2013-06-19
  • Contact: CHU Mansheng
  • About author:-
  • Supported by:
    -

Abstract: The effects of the high chromium vanadiumtitanium magnetite ores on the oxidized pellet preparation process and metallurgy properties were investigated and its largest mass fraction for superior quality of the oxidized pellets was also explored according to the research on fundamental characteristics of the ores. The results showed that the high chromium vanadiumtitanium magnetite mainly composed of magnetite, magnesioferrite, chromite, geikielite, coulsonite and titanomagnetite etc., of which the particle size was large, and crystal stock strength was low. With the increase of the mass fraction of high chromium vanadiumtitanium magnetite in the raw materials of the pellets, the properties of green pellets had no significant changes, but the compressive strength of the finished oxidized pellets decreased, when the mass fraction of the ores was greater than 20%, the compressive strength couldn’t meet the requirement of the blast furnace production. On the other hand, increasing the mass fraction of high chromium vanadiumtitanium magnetite was conducive to reduce the reduction swelling rate of the pellets. When its mass fraction increased from 0 to 20%, the reduction swelling rate decreased from 321% to 211% accordingly.

Key words: high chromium vanadiumtitanium magnetite, fundamental characteristics, oxidized pellets, compressive strength, reduction swelling rate

CLC Number: