HUANG Xian-zhen， CAO Hui， ZHANG Yi-min. Probabilistic Analysis for Cutting Force in Orthogonal Cutting Using Monte-Carlo Method[J]. Journal of Northeastern University Natural Science, 2015, 36(2): 254-258.
[1]Molinari A，Moufki A.The Merchant’s model of orthogonal cutting revisited:a new insight into the modeling of chip formation［J］.International Journal of Mechanical Sciences，2008，50(2):124-131. [2]Adibi-Sedeh A H，Madhavan V，Bahr B.Extension of Oxley’s analysis of machining to use different material models［J］.Journal of Manufacturing Science and Engineering，2003，125(4):656-666. [3]Lalwani D I，Mehta N K，Jain P K.Extension of Oxley’s predictive machining theory for Johnson and Cook flow stress model［J］.Journal of Materials Processing Technology，2009，209(12/13):5305-5312. [4]张义民.机械可靠性设计的内涵与递进［J］.机械工程学报，2010，46(14):167-188.(Zhang Yi-min.Connotation and development of mechanical reliability-based design［J］.Journal of Mechanical Engineering，2010，46(14):167-188.) [5]Astakhov V P，Osman M O M，Hayajneh M T.Re-evaluation of the basic mechanics of orthogonal metal cutting:velocity diagram，virtual work equation，and upper bound theorem［J］.International Journal of Machine Tools and Manufacturing，2001，41(3):393-418. [6]Tounsi N，Vincenti J，Otho A，et al.From the basics of orthogonal metal cutting toward the identification of the constitutive equation［J］.International Journal of Machine Tools and Manufacturing，2002，42(12):1373-1383. [7]Li B L，Wang X L，Hu Y J，et al.Analytical prediction of cutting forces in orthogonal cutting using unequal division shear-zone model［J］.International Journal of Advanced Manufacturing Technology，2011，54(5/6/7/8):431-443. [8]Dudzinski D，Molinari A.A modelling of cutting for viscoplastic materials［J］.International Journal of Mechanical Sciences，1997，39(4):369-389. [9]陈日曜.金属切削原理［M］.北京:机械工业出版社，1993.(Chen Ri-yao.Theory of metal cutting［M］.Beijing:China Machine Press，1993.) [10]Zio E.The Monte Carlo simulation method for system reliability and risk analysis［M］.London:Springer，2013. [11]Zhang Y M，He X D，Liu Q L，et al.Robust reliability design of banjo flange with arbitrary distribution parameters［J］.Journal of Pressure Vessel Technology:Transactions of the ASME，2005，127(4):408-413. [12]O’Connor P D T，Kleyner A.Practical reliability engineering［M］.5th ed.Chichester:Weily，2012.(上接第253页) [4]Thite A N，Thompson D J.The quantification of structure-borne transmission paths by inverse methods.part 1:improved singular value rejection methods［J］.Journal of Sound and Vibration，2003，264(2):411-431. [5]Thite A N，Thompson D J.The quantification of structure-borne transmission paths by inverse methods.part 2:use of regularization techniques［J］.Journal of Sound and Vibration，2003，264(2):433-451. [6]Gunduz A，Inoue A，Singh R.Estimation of interfacial forces in time domain for linear systems［J］.Journal of Sound and Vibration，2010，329(13):2616-2634. [7]Singh R，Kim S.Examination of multi-dimensional vibration isolation measures and their correlation to sound radiation over a broad frequency range［J］.Journal of Sound and Vibration，2003，262(3):419-455. [8]赵薇，张义民.频域内振动传递路径系统的传递率研究［J］.东北大学学报:自然科学版，2008，29(sup2):56-59.(Zhao Wei，Zhang Yi-min.Transfer ratio of vibration transfer path systems in frequency range［J］.Journal of Northeastern University:Natural Science，2008，29(sup2):56-59.) [9]Zhao W，Zhang Y M.Path transfer probability for vibration transfer path systems with translational and rotational motions in time range［J］.Applied Mechanics and Materials，2012，121/122/123/124/125/126:4532-4536.
