Journal of Northeastern University Natural Science ›› 2016, Vol. 37 ›› Issue (5): 702-706.DOI: 10.12068/j.issn.1005-3026.2016.05.020

• Resources & Civil Engineering • Previous Articles     Next Articles

Simulation of Emission Limits for Paper-Making Industry Based on Petri Net and BAT

JIANG Qiu-li1,2, WANG Peng-fei1, HAN Tian-fang1, HU Xiao-min1   

  1. 1. School of Resources & Civil Engineering, Northeastern University, Shenyang 110819, China; 2. Environment Monitoring Test Center in Liaoning Province, Shenyang 110161, China.
  • Received:2015-07-01 Revised:2015-07-01 Online:2016-05-15 Published:2016-05-13
  • Contact: HU Xiao-min
  • About author:-
  • Supported by:
    -

Abstract: Through the simulation and calculation of object Petri net modeling and simulation environment (OPMSE) for the emission mass concentrations of COD, BOD5 and NH3-N in waste water from paper-making industry, the range of COD, BOD5 and NH3-N mass concentrations in typical paper-making industry were inquiried and investigated in Qinghe basin. The results show that when the confidence level is 99%, the confidence interval of COD is (34.09, 41.84), the confidence interval of BOD5 is (6.65, 8.40), and the confidence interval of NH3-N is (6.28, 7.34). The mass concentration of the optimum effluent is ρ(COD)=12. 79mg/L, ρ(BOD5)=2.62mg/L, ρ(NH3-N)=3. 33mg/L, while the mass concentrations of the worst effluent are ρ(COD)=70.47mg/L, ρ(BOD5)=14.51mg/L, ρ(NH3-N)=10.22mg/L. Then making a comparison between the emission standards and simulation results are got. The direct emission limits of the paper-making industry are ρ(COD)=45mg/L, ρ(BOD5)=9mg/L, ρ(NH3-N)=8mg/L.

Key words: best available technology (BAT), emission limits, paper-making industry, simulation, Petri net

CLC Number: