Finite Element Analysis of Knee Joint Cartilage at Turning of Plough Type Ski

doi:10.12068/j.issn.1005-3026.2017.10.013

Abstract

Abstract: Two hundred subjects were randomly selected to record their basic information， joint angle and sliding speed， and 181 valid data were analyzed. According to a volunteer′s MR， CT data， a 3D cartilage and bone model of the knee 140° was established. According to the result of kinematic analysis and knee anatomy structure， the load and constraints were defined. The stress concentration position on the knee cartilage was obtained in the Abaqus6.14. The results showed that the slider with large weight or sliding too fast should increase the turning radius in order to reduce the stress of the centripetal force on knee joint cartilage. It is advisable to control the speed of plough type turn within 3m/s.

Key words: knee joint cartilage, finite element analysis, plough type ski, turning side of knee joint, biomechanics

CLC Number:

G804.6

FU Yan-ming， YU Tian-biao， WANG Xin， WANG Wan-shan. Finite Element Analysis of Knee Joint Cartilage at Turning of Plough Type Ski[J]. Journal of Northeastern University Natural Science, 2017, 38(10): 1431-1435.

References

[1]王西十，白瑞浦.关于人膝关节生物力学模型的研究现状［J］.力学进展，1999，29(2):244-250.(Wang Xi-shi，Bai Rui-pu.The research status of biomechanics of the knee joint model［J］.Advances in Mechanics，1999，29(2):244-250.)
[2]Iesaka K，Tsumura H，Sonoda H，et al.The effects of tibial component inclination on bone stress after unicompartmental knee arthroplasty［J］.Journal of Biomechanics，2002，35:969-974.
[3]付彦铭.逆向工程技术在人体膝关节三维重建中的应用［J］.科技创新导报，2015，35(1):14-15.(Fu Yan-ming.Application of reverse engineering technology in human knee joint of 3D reconstruction［J］.Science and Technology Innovation Herald，2015，35(1):14-15.)
[4]张宇，郝智秀，金德闻，等，基于磁共振图像的人体膝关节三维模型的建立［J］.中国康复医学杂志，2007，22(4):339-342.(Zhang Yu，Hao Zhi-xiu，Jin De-wen，et al.A method of vivo human knee joint 3D model reconstruction based on MR images［J］.Chinese Journal of Rehabilitation Medicine，2007，22(4):339-342.)
[5]Bin S I，Kim J M，Shin S J.Radial tears of the posterior horn of the medial meniscus［J］.Arthroscopy，2004，20(4):373-378.
[6]Bottcher P，Zeissler M，Maierl J，et al.Mapping of split-line pattern and cartilage thickness of selected donor and recipient sites for autologous osteochondral transplantation in the canine stifle joint［J］.Veterinary Surgery，2009，38(6):696-704.
[7]Guess T M，Thiagarajan G，Kia M，et al.A subject specific multibody model of the knee with menisci［J］.Medical Engineering & Physics，2010，32(5):505-515.
[8]Li I G，Gill J，Kanamori A，et al.A validated three-dimensional computational model of a human joint［J］.ASME Journal of Biomechanical Engineering，1999，121:657-662.
[9]Pefia E，Calvo B，Martinez M A，et al.A three-dimensional finite element analysis of the combined behavior of ligaments and menisci in the healthy human knee join［J］.Journal of Biomechanics，2006，39:1686-1701.
[10]Kozanek M，Hosseini A，Liu F，et al.Tibiofemoral kinematics and condylar motion during the stance phase of gait［J］.Journal of Biomechanics，2009，42(12):1877-1884.
[11]Donahue T L，Hull M L，Rashid M M，et al.A finite element model of the human knee joint for the study of tibiofemoral contact［J］.Journal of Biomechanical Engineering，2002，124(3):273-280.
[12]Joseph M.Changes in articular cartilage mechanics with meniscectomy:a novel image-based modeling approach and comparison to patterns of OA［J］. Journal of Biomechanics，2011，44(12):2307-2312.
[13]Wang Y X，Fan Y B，Zhang M.Comparison of stress on knee cartilage during kneeling and standing using finite element models［J］.Medical Engineering & Physics，2014，36(4):439-447.

[1]	AN Guo-qing， WANG Rui， ZHAO Hui， LI Tie-ying. Dynamic Response of Double-Skin Steel-Concrete Composite Panel Under Impact Loading [J]. Journal of Northeastern University(Natural Science), 2022, 43(8): 1192-1200.
[2]	WANG Lian-guang， MENG Yu-qi， WANG Zi-qing. Connection of Precast Profiled Steel Sheet Concrete Composite Plate and Steel Beam and Its Finite Element Analysis [J]. Journal of Northeastern University(Natural Science), 2022, 43(4): 575-581.
[3]	CHEN Xiao-hui， ZHANG Heng， LIU Ming-yue， HOU Dong-xiao. Finite Element Analysis of Tensile Failure of Open-Pored Carbon Fiber Composite Laminates [J]. Journal of Northeastern University(Natural Science), 2022, 43(3): 397-403.
[4]	ZHANG Yao-man， LI Wan-peng， YANG Ming-yu. Milling Force Characteristics of Titanium Alloy Parts Machined by Ball-end Milling Cutter [J]. Journal of Northeastern University Natural Science, 2020, 41(6): 852-857.
[5]	LI Wu-jie， GUO Li-xin. Effect of Different Postures on Burst Fracture of Thoracolumbar Segment [J]. Journal of Northeastern University Natural Science, 2020, 41(4): 534-540.
[6]	LI Jun-chao， XIE Feng， ZHAO Ze， GONG Peng-cheng. Numerical Simulation and Fracture Prediction of Incremental Sheet Forming of Metals [J]. Journal of Northeastern University Natural Science, 2019, 40(4): 488-494.
[7]	LIU Chuang， LIU Qi， YAN Yun-hui. Biomechanical Simulation of Artificial Lumbar Intervertebral Disc Replacement and Intervertebral Fusion [J]. Journal of Northeastern University Natural Science, 2019, 40(10): 1517-1520.
[8]	FENG Nai-shi， WANG Hong， HU Fo， LI Kang. Design and Analysis of Fiber-Reinforced Three-Cavity Structure of Soft Robot Hands [J]. Journal of Northeastern University Natural Science, 2019, 40(10): 1461-1466.
[9]	WANG Lin ， HUA Cheng-cheng， JIANG Xin， WANG Hong. Investigation on Driver Fatigue Testing Based on the Combination of Cervical-Lumbar EMG and EEG [J]. Journal of Northeastern University Natural Science, 2018, 39(1): 102-107.
[10]	SONG Bo， WANG Lian-guang， WANG Chun-gang. Stability Behavior of Channel Columns with Complex Edge Stiffeners and Cap Shaped Stiffeners [J]. Journal of Northeastern University Natural Science, 2018, 39(1): 143-147.
[11]	PAN Hong-gang， YUAN Hui-qun， ZHAO Tian-yu， WANG Guang-ding. Modal Testing Experiment Based on Simulation Impeller of Turbine [J]. Journal of Northeastern University Natural Science, 2017, 38(9): 1298-1303.
[12]	CHEN Yan， LU Xu， JIANG Peng， GUAN Zhen-qun. Analysis on Critical Influential Factors of Axial Load Uniform Distribution in Bolted Joint [J]. Journal of Northeastern University Natural Science, 2017, 38(8): 1142-1147.
[13]	LU Xiao-hong， WANG Fu-rui， LU Yan-jun， GAO Lu-si. Finite Element Simulation of Surface Residual Stress in Micro-milling Inconel 718 [J]. Journal of Northeastern University Natural Science, 2017, 38(2): 254-259.
[14]	YAN Yu-tao， QIAN Xiao-lin， ZHANG Yi-bo， SUN Zhi-li. Analysis on Crack Tip J Integral Value Under Sliding Contact Effect [J]. Journal of Northeastern University Natural Science, 2016, 37(12): 1744-1749.
[15]	YANG Guang， ZHANG Kang-sheng， HU Zheng-huan. Feasibility Study on Screw Compressor Driven Rotor with Fixed Cross Rolling [J]. Journal of Northeastern University Natural Science, 2015, 36(12): 1785-1789.