东北大学学报（自然科学版）

东北大学学报:自然科学版 ›› 2015, Vol. 36 ›› Issue (4): 537-541.DOI: 10.12068/j.issn.1005-3026.2015.04.018

• 机械工程 • 上一篇    下一篇

基于CFD的气流式皮清机内部流场

董全成1， 冯显英1， 张成梁2   

  1. (1.山东大学 高效洁净机械制造教育部重点实验室， 山东 济南250061； 2.济南大学 机械工程学院， 山东 济南250022)
  • 收稿日期:2013-11-06 修回日期:2013-11-06 出版日期:2015-04-15 发布日期:2014-11-07
  • 通讯作者: 董全成
  • 作者简介:董全成(1980-)，男，河北献县人，山东大学博士研究生; 冯显英(1965-)，男，山东济宁人，山东大学教授，博士生导师.
  • 基金资助:
    国家自然科学基金资助项目(51405194，51305164)； 科技支疆专项计划项目(2011AB017)； 济南“泉城学者”建设工程资助项目(201109).

Internal Flow Field of Flow-Through Air Lint Cleaner Based on CFD

DONG Quan-cheng1， FENG Xian-ying1， ZHANG Cheng-liang2   

  1. 1.Key Laboratory of High Efficiency and Clean Mechanical Manufacture， Ministry of Education， Shandong University， Jinan 250061， China; 2.School of Mechanical Engineering， University of Jinan， Jinan 250022， China.
  • Received:2013-11-06 Revised:2013-11-06 Online:2015-04-15 Published:2014-11-07
  • Contact: FENG Xian-ying
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

1083

摘要： 利用基于CFD(computational fluid dynamics)的数值分析方式，对进口风速、排杂槽口宽度等参数改变引起的气流式皮清机内部速度场和压力场变化进行了仿真分析.采用速度矢量分析了进口风速的影响:进口风速为15m/s时最佳，风速过低或者过高都易于引起堵塞；采用了压力云图及压力分布分析了排杂槽口宽度的影响:排杂槽口宽度为20mm，进口风速为15m/s时无向外排风现象，且向内补风风速最低，清杂及落棉的综合效果最佳.数值分析结果与试验验证结果相同，表明用CFD数值分析的方式可以为气流式皮清机的运行参数调节提供优化分析.

关键词: 棉花, 皮棉清理, 速度场, 压力场, 计算流体力学

Abstract: The effects of inlet airflow velocity and notch width on the velocity field and lint cleaner pressure field were simulated using the CFD (computational fluid dynamics). The velocity vector was applied to analyze the effect of inlet airflow velocity. The lint cleaner can run normally with velocity of 15m/s， which is easy blocked at higher and lower velocity. The pressure field contour and pressure distribution analysis were used to study the effect of notch width. Under 20mm notch width and 15m/s inlet airflow， no exhaust air phenomenon in lint cleaner while it has the lowest supplement air velocity， the best cleaning rate and loss lint rate. The CFD simulation results are consist to that of the experiment， indicating that the CFD analysis can optimize the operating parameters for the flow-through air lint cleaner.

Key words: cotton, lint cleaning, velocity field, pressure field, computational fluid dynamics

中图分类号: