钢带烧结料层的干燥氧化过程仿真

doi:10.12068/j.issn.1005-3026.2021.09.010

摘要/Abstract

摘要： 针对钢带烧结机内铬铁球团的干燥氧化过程，建立一套多尺度的欧拉-欧拉双流体数学模型. 基于收缩核模型计算单个球团的物理化学反应，模型预测结果与现场数据吻合.结果发现生球层的干燥可以分为两阶段:不均匀升速干燥阶段和降速干燥阶段. 在生球层底部，第二干燥阶段会出现干燥速率又升高的现象，此时湿核表面温度为383K. 而当湿核半径小于4.75mm后干燥速率又开始下降. 过湿区的最大水分质量分数为10.2%，比初始值高7.4%. 当铬铁球团的温度达到焦炭的燃点后，焦炭的氧化优先于磁铁矿. 生球层在烧结区出口的平均温度达到1698K，满足生产需求.

关键词: 铬铁球团烧结;收缩核模型;传热传质;干燥氧化

Abstract: A multi-scale Eulerian-Eulerian mathematical model was developed to study the drying and coke-magnetite oxidation process of ferrochrome pellets in a steel belt sintering machine. Physicochemical reactions of an individual pellet were calculated by the shrinking core model. The predictions were in reasonable agreement with the industrial data. The results showed that the drying of green pellets can be divided into two stages: the uneven increasing-rate and the falling-rate drying stages. However， in the latter stage， it was also observed that the drying rate increased gradually at the bottom of green pellets when the surface temperature of the wet bulb was higher than 383K. It decreased again after the radius of the wet bulb was smaller than 4.75mm. The maximum weight percent of the moisture in green pellets was 10.2%， which was 7.4% higher than the initial one. When the temperature of ferrochrome pellets reached the coke ignition， the coke oxidation had precedence over the magnetite oxidation. The average sintering temperature of green pellets was 1698K at the outlet of the sintering zone， meeting the process requirements.

Key words: sintering of ferrochrome pellets; shrinking core model; heat and mass transfer; drying and oxidation

中图分类号:

TF046

王长军，于洋，李宝宽，刘雪林. 钢带烧结料层的干燥氧化过程仿真[J]. 东北大学学报（自然科学版）, 2021, 42(9): 1282-1289.

WANG Chang-jun， YU Yang， LI Bao-kuan， LIU Xue-lin. Simulation of Drying and Oxidation Process of Pellets Layers in Steel Belt Sintering[J]. Journal of Northeastern University(Natural Science), 2021, 42(9): 1282-1289.

参考文献

[1]余海钊，廖继勇，范晓慧.带式焙烧机球团技术的应用及研究进展［J］.烧结球团，2020(4):47-54.(Yu Hai-zhao，Liao Ji-yong，Fan Xiao-hui.Application and research progress of pelletizing technology of belt roaster［J］.Sintering and Pelletizing，2020(4):47-54.)
[2]ztürk F D，Temel H A.Beneficiation of konya-beyehir chromite for producing concentrates suitable for industry［J］.JOM，2016，68(9):2449-2454.
[3]Tripathy S K，Murthy Y R，Singh V，et al.Processing of ferruginous chromite ore by dry high-intensity magnetic separation［J］.Mineral Processing and Extractive Metallurgy Review，2016，37(3):196-210.
[4]Zhu D Q，Yang C C，Pan J，et al.An integrated approach for production of stainless steel master alloy from a low grade chromite concentrate［J］.Powder Technology，2018，335:103-113.
[5]Agarwal S，Pal J，Ghosh D.Development of chromite sinter from ultra-fine chromite ore by direct sintering［J］.ISIJ International，2014，54(3):559-566.
[6]Yu Y，Li B K，Wang C J，et al.Evaluation and synergy of material and energy in the smelting process of ferrochrome pellets in steel belt sintering-submerged arc furnace［J］.Energy，2019，179:792-804.
[7]朱德庆，熊守安，仉宏亮，等.铬铁精矿球团烧结工艺与机理［J］.中南大学学报(自然科学版)， 2010，41(5):1658-1667.(Zhu De-qing，Xiong Shou-an，Zhang Hong-liang，et al.Pellets sintering process of chromite concentrate and mechanism of consolidation［J］.Journal of Central South University(Science and Technology)，2010，41(5):1658-1667.)
[8]Weber P，Eric R H.The reduction of chromite in the presence of silica flux［J］.Minerals Engineering，2006，19(3):318-324.
[9]Singh V，Tathavadkar V，Rao S M，et al.Estimating effect of chrome ore granulometry on sintered pellet properties［J］.Ironmaking & Steelmaking，2008，35(1):27-32.
[10]Kleynhans E L J，Beukes J P，Van Zyl P G，et al.Unique challenges of clay binders in a pelletised chromite pre-reduction process［J］.Minerals Engineering，2012，34:55-62.
[11]Kleynhans E L J，Neizel B W，Beukes J P，et al.Utilisation of pre-oxidised ore in the pelletised chromite pre-reduction process［J］.Minerals Engineering，2016，92:114-124.
[12]Tsukerman T，Duchesne C，Hodouin D.On the drying rates of individual iron oxide pellets［J］.International Journal of Mineral Processing，2007，83(3/4):99-115.
[13]Ljung A L，Lundstrom T S，Marjavaara B D，et al.Convective drying of an individual iron ore pellet—analysis with CFD［J］.International Journal of Heat and Mass Transfer，2011，54(17/18):3882-3890.
[14]Patisson F，Bellot J P，Ablitzer D.Study of moisture transfer during the strand sintering process［J］.Metallurgical Transactions B，1990，21(1):37-47.
[15]Assari M R，Tabrizi H B，Saffar-Avval M.Numerical simulation of fluid bed drying based on two-fluid model and experimental validation［J］.Applied Thermal Engineering，2007，27(2/3):422-429.
[16]Defraeye T，Blocken B，Carmeliet J.Analysis of convective heat and mass transfer coefficients for convective drying of a porous flat plate by conjugate modelling［J］.International Journal of Heat and Mass Transfer，2012，55(1/2/3):112-124.
[17]Papanastassiou D，Bitsianes G.Mechanisms and kinetics underlying the oxidation of magnetite in the induration of iron ore pellets［J］.Metallurgical Transactions，1973，4(2):487-496.
[18]Ljung A L，Frishfelds V，Lundstrom T S，et al.Discrete and continuous modeling of heat and mass transport in drying of a bed of iron ore pellets［J］.Drying Technology，2012，30(7):760-773.
[19]Davis R A，Englund D J.Model and simulation of a ported kiln for iron oxide pellet induration［J］.Canadian Journal of Chemical Engineering，2003，81(1):86-93.
[20]Barati M.Dynamic simulation of pellet induration process in straight-grate system［J］.International Journal of Mineral Processing，2008，89(1/2/3/4):30-39.
[21]Sadrnezhaad S K，Ferdowsi A，Payab H.Mathematical model for a straight grate iron ore pellet induration process of industrial scale［J］.Computational Materials Science，2008，44(2):296-302.
[22]Fan X H，Wang Y，Chen X L.Mathematical models and expert system for grate-kiln process of iron ore oxide pellet production.Part II:rotary kiln process control［J］.Journal of Central South University，2012，19(6):1724-1727.
[23]Tan S，Peng J，Shi H B.Modeling and simulation of iron ore pellet drying and induration process with accurate bed void fraction calculation［J］.Drying Technology，2016，34(6):651-664.
[24]Gan M，Ji Z Y，Fan X H，et al.Value-added utilization of waste silica powder into high-quality chromite pellets preparation process［J］.Powder Technology，2018，328:122-129.
[25]Forsmo S P E，Forsmo S E，Samskog P O，et al.Mechanisms in oxidation and sintering of magnetite iron ore green pellets［J］.Powder Technology，2008，183(2):247-259.
[26]Majumder S，Natekar P V，Runkana V.Virtual indurator:a tool for simulation of induration of wet iron ore pellets on a moving grate［J］.Computers & Chemical Engineering，2009，33(6):1141-1152.
[27]Bluhm-Drenhaus T，Simsek E，Wirtz S，et al.A coupled fluid dynamic-discrete element simulation of heat and mass transfer in a lime shaft kiln［J］.Chemical Engineering Science，2010，65(9):2821-2834.
[28]Pahlevaninezhad M，Emami M D，Panjepour M.The effects of kinetic parameters on combustion characteristics in a sintering bed［J］.Energy，2014，73:160-176.
[29]Fu D，Tang G W，Zhao Y F，et al.Modeling of iron ore reactions in blast furnace［J］.International Journal of Heat and Mass Transfer，2016，103:77-86.
[30]Ergun S.Fluid flow transport through packed column［J］.Chemical Engineering Progress，1952，48:89-94.［31］Young R W，Cross M，Gibson R D.Mathematical model of grate-kiln-cooler process used for induration of iron ore pellets［J］.Ironmaking & Steelmaking，1979，6(1):1-13.(上接第1274页)
[12]Avdi M，Maeti Z，Sayed A E，et al.A novel approach in determination of biofilm forming capacity of bacteria using random forest classifier［M］.Banja Luka:Springer，Cham，2019:273-279.
[13]Guo J，Wang J，Li Q，et al.Construction of prediction model of neural network railway bulk cargo floating price based on random forest regression algorithm［J］.Neural Computing and Applications，2019，31(12):8139-8145.
[14]纪英俊，勇晓玥，刘英林，等.基于随机森林的热轧带钢质量分析与预测方法［J］.东北大学学报(自然科学版)，2019，40(1):11-15.(Ji Ying-jun，Yong Xiao-yue，Liu Ying-lin，et al.Random forest based quality analysis and prediction method for hot-rolled strip［J］.Journal of Northeastern University (Natural Science )，2019，40(1):11-15.)
[15]Zhou Y J，Guo J L，Fu L Y，et al.Research on aero-engine maintenance level decision based on improved artificial fish-swarm optimization random forest algorithm［C］ // IEEE 2018 International Conference on Sensing，Diagnostics，Prognostics，and Control.Xi’an，2018:606-610.
[16]吕何，孔政敏，张成刚.基于混合优化随机森林回归的短期电力负荷预测［J］.武汉大学学报(工学版)，2020，53(8):704-711.(Lyu He，Kong Zheng-min，Zhang Cheng-gang.Short-term power load forecasting based on hybrid optimization stochastic forest regression ［J］.Journal of Wuhan University(Engineering Edition)，2020，53(8):704-711.)