东北大学学报(自然科学版) ›› 2008, Vol. 29 ›› Issue (3): 332-334.DOI: -

• 论著 • 上一篇    下一篇

冷变形织构沿纯铜线材径向分布的研究

姚旭升;刘沿东;左良;   

  1. 东北大学材料各向异性与织构教育部重点实验室;东北大学材料各向异性与织构教育部重点实验室;东北大学材料各向异性与织构教育部重点实验室 辽宁 沈阳 110004;辽宁 沈阳 110004;辽宁 沈阳 110004
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2008-03-15 发布日期:2013-06-22
  • 通讯作者: Yao, X.-S.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金(50671021);;

On the radial distribution of cold deformation textures of pure copper wire

Yao, Xu-Sheng (1); Liu, Yan-Dong (1); Zuo, Liang (1)   

  1. (1) Key Laboratory for Anisotropy and Texture of Materials, Northeastern University, Shenyang 110004, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2008-03-15 Published:2013-06-22
  • Contact: Yao, X.-S.
  • About author:-
  • Supported by:
    -

摘要: 为了探讨显微组织与形变织构的相关性,对纯铜线材运用精确的线材织构测定方法进行织构测定,采用取向分布函数法(ODF)分析了织构沿纯铜线材径向的分布.研究表明:单晶铜线材表面织构组分由〈100〉,〈112〉与〈110〉组成.由表及里〈100〉呈现增加趋势,并在中心层成为主要织构组分;〈112〉先增加后减少;〈110〉呈现减少趋势.多晶铜线材表面织构组分有〈100〉,〈111〉,〈112〉.由表及里〈100〉呈现先增加后减少;〈111〉呈现增加趋势,并在中心层与〈100〉成为主要织构组分;〈112〉先减少后增加.

关键词: 取向分布函数法(ODF), 单晶铜, 多晶铜, 织构, 拉拔

Abstract: To explore the correlation between microstructure and deformation texture, the textures of copper wire were investigated in detail by XRD with a precision texture measurement suitable for wire samples provided. The radial distribution of deformation textures was analyzed by means of ODF. The results demonstrated that the surface textures of single-crystal copper wire consist of <100>, <112> and <110>, among which the <100> increases from surface to center of the wire and becomes the main texture in central layer, while <112> tends to increase then decrease from surface to center and <110> tends to decrease. However, the surface textures of poly-crystal copper wire consist of <100>, <112> and <111>, among which <100> tends to increase then decrease and <112> tends to decrease then increase from surface to center, while <111> tends to increase and both <100> and <111> become the main texture in central layer.

中图分类号: