东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2008, Vol. 29 ›› Issue (5): 697-700.DOI: -

• 论著 • 上一篇    下一篇

烧结矿粘结相的熔化特性

李光森;金明芳;姜鑫;沈峰满;   

  1. 东北大学材料与冶金学院;东北大学材料与冶金学院;东北大学材料与冶金学院;东北大学材料与冶金学院 辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004;辽宁沈阳110004
  • 收稿日期:2013-06-22 修回日期:2013-06-22 出版日期:2008-05-15 发布日期:2013-06-22
  • 通讯作者: Li, G.-S.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50474014)

Melting characteristics of agglomerating phase in sinter

Li, Guang-Sen (1); Jin, Ming-Fang (1); Jiang, Xin (1); Shen, Feng-Man (1)   

  1. (1) School of Materials and Metallurgy, Northeastern University, Shenyang 110004, China
  • Received:2013-06-22 Revised:2013-06-22 Online:2008-05-15 Published:2013-06-22
  • Contact: Li, G.-S.
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

799

摘要： 以高碱度烧结矿中的铁酸盐粘结相为研究对象,考察了粘结相的熔化特性随粘结相组成的变化规律.通过试验探讨了不同nCaO∶nFe2O3以及不同的w(Mg),w(MgO2),w(SiO2)和w(Al2O3)铁酸盐粘结相的熔化特性.结果表明,nCaO∶nFe2O3=1∶1时,粘结相的熔化温度最低,熔化时间最短;添加MgO粘结相的熔化温度升高,熔化时间变长;当w(SiO2)或w(Al2O3)为3%时,粘结相的熔化温度最低,熔化最快.

关键词: 烧结矿, 粘结相, 熔化温度, 熔化时间, 熔化特性

Abstract: The melting characteristics of agglomerating ferrite phase in high-basicity sinter were investigated and discussed to grasp the relationship between the melting temperature and the phase's composition by way of the experiments in which the mass fractions of nCaO:nFe2O3, w(MgO), w(SiO2) and w(Al2O3) in the agglomerating ferrite phase were all changed. The results indicated that melting temperature is the lowest with melting time the shortest if nCaO:nFe2O3=1:1, and the phase's melting temperature/time increases if adding MgO into the sinter. The melting temperature/time falls down to the minimum if the mass fraction of either w(SiO2) or w(Al2O3) is 3%.

中图分类号: