780MPa级微合金钢的激光相变硬化工艺及组织性能

doi:10.12068/j.issn.1005-3026.2016.06.006

东北大学学报:自然科学版 ›› 2016, Vol. 37 ›› Issue (6): 785-789.DOI: 10.12068/j.issn.1005-3026.2016.06.006

780MPa级微合金钢的激光相变硬化工艺及组织性能

孙茜，邸洪双，李峻臣

(东北大学轧制技术及连轧自动化国家重点实验室，辽宁沈阳110819)

收稿日期:2015-05-27 修回日期:2015-05-27 出版日期:2016-06-15 发布日期:2016-06-08
通讯作者: 孙茜
作者简介:孙茜(1985-)，女，辽宁鞍山人，东北大学博士研究生；邸洪双(1958-)，男，辽宁锦州人，东北大学教授，博士生导师.
基金资助:
国家自然科学基金资助项目(51274063).

Laser Transformation Hardening Process and Microstructure and Properties of 780 MPa Grade Micro-alloy Steel

SUN Qian， DI Hong-shuang， LI Jun-chen

The State Key Laboratory of Rolling and Automation， Northeastern University， Shenyang 110819， China.

Received:2015-05-27 Revised:2015-05-27 Online:2016-06-15 Published:2016-06-08
Contact: DI Hong-shuang
About author:-
Supported by:
-

摘要/Abstract

摘要： 利用4kW光纤激光器对一种780MPa级Nb-Ti-Mo微合金化的低碳钢进行了激光相变强化处理，研究了激光功率和扫描速度对激光相变区宏观形貌和显微硬度的影响，讨论了激光相变区显微组织的演变规律.结果表明:随着激光功率的增加或扫描速度的降低，激光相变区宽度和深度逐渐增加.激光相变区包含三个区域:微熔区、硬化区和过渡区.微熔区显微组织为铁素体、粒状贝氏体和马氏体；硬化区显微组织为全马氏体；过渡区为相对细小的全马氏体或与铁素体的混合组织.在所研究的参数中，硬化区的硬度可超过母材30%左右，平均硬度达到320HV.实验钢表面耐磨性能提高30%左右.

关键词: 激光相变硬化, 超高强钢, 显微组织, 显微硬度, 耐磨性, 马氏体

Abstract: A Nb-Ti-Mo micro-alloyed ultra-high strength hot-rolled low carbon steel was treated by laser induced phase transformation hardening process， using IPG 4kW fiber laser. The effects of laser power and scanning speed on macroscopic morphology and mirco-hardness were investigated. The microstructure evolution in laser transformation zone was also discussed. The results showed that when the laser power increased or the scanning speed decreased， the width and depth of the laser transformation zone increased. Laser transformation zone can be characterized into three smaller zones in general: micro-melting zone (MZ)， hardening zone (HZ) and transition zone (TZ). In this study， the microstructure in the MZ was ferrite， granular bainite and martensite， whereas the microstructure in the HZ was fully martensite， compared to the microstructure in the TZ which consisted of the relatively finer individual martensite and the structure mixed with ferrite and martensite. The average hardness of the HZ reached 320HV， which was 30% higher than that of the matrix. The wear resistance of the steel was significantly improved by 30% after the laser treatment.

Key words: laser transformation hardening, ultra-high strength steel, microstructure, micro-hardness, wear resistance, martensite

中图分类号:

TG141

孙茜，邸洪双，李峻臣. 780MPa级微合金钢的激光相变硬化工艺及组织性能[J]. 东北大学学报:自然科学版, 2016, 37(6): 785-789.

SUN Qian， DI Hong-shuang， LI Jun-chen. Laser Transformation Hardening Process and Microstructure and Properties of 780 MPa Grade Micro-alloy Steel[J]. Journal of Northeastern University Natural Science, 2016, 37(6): 785-789.

参考文献

[1]Purushothaman D B，Gengusamynaidu B，Karupuudaiyar R B.Experimental studies on the microstructure and hardness of laser transformation hardening of low alloy steel ［J］.Transactions of the Canadian Society for Mechanical Engineering，2012，36(3):241-257.
[2]Pantelis D I，Bouyiouri E，Kouloumbi N，et al.Wear and corrosion resistance of laser surface hardened structural steel ［J］.Surface and Coatings Technology，2002，161(2/3):125-134.
[3]孙桂芳，刘常升，陶兴启，等.高镍铬无限冷硬铸铁轧辊表面激光合金化的研究［J］.东北大学学报(自然科学版)，2008，29(6):845-848.(Sun Gui-fang，Liu Chang-sheng，Tao Xing-qi，et al.Research on laser alloying of high-Ni-Cr infinite chilled cast iron roller ［J］.Journal of Northeastern University(Natural Science)， 2008，29(6):845-848.)
[4]Mahmoudi B，Sabour Aghdam A R，Torkamany M J.Controlled laser transformation hardening of martenstitic stainless steel by pulsed Nd:YAG laser ［J］.Journal of Electronic Science and Technology，2010，8(1):87-90.
[5]邱星武.1Cr18Ni9Ti激光相变硬化层组织及性能［J］.激光技术，2011，35(3):425-428.(Qiu Xing-wu.Microstructure and properties of laser transformation hardening layer on 1Cr18Ni9Ti ［J］.Laser Technology，2011，35(3):425-428.)
[6]Ho J S，Young T Y.Microstructural and hardness investigation of hot-work tool steels by laser surface treatment ［J］.Journal of Material Processing Technology，2008，201(1/2/3):342-347.
[7]Shariff S M，Pal T K，Padmanabham G，et al.Silding wear behavior of laser surface modified perlitic rail steel ［J］.Surface Engineering，2010，26(3):199-208.
[8]Katsamas A I，Haidemenopoulos G N.Surface hardening of low-alloy 15CrNi6 steel by CO₂laser beam ［J］.Surface and Coatings Technology，1999，115(2/3):249-255.
[9]Hirogaki T，Nakagawa H，Hayamizu M，et al.In-situ heat treatment system for die steels using YAG laser with a machining center ［J］.Journal of the International Societies for Precision Engineering and Nanotechnology，2001，25(3):212-217.
[10]Tewary N K，Syed B，Ghosh S K，et al.Microstructural evolution and mechanical behaviour of surface hardened low carbon hot rolled steel ［J］.Materials Science & Engineering A，2014，606:58-67
[11]张培磊，丁敏，姚舜，等.低碳钢表面激光相变硬化研究［J］.激光技术，2009，33(6):586-589.(Zhang Pei-lei，Ding Min，Yao Shun，et al.Research of laser transformation hardening on mild steel ［J］.Laser Technology，2009，33(6):586-589.)
[12]晁明举.金属材料表面激光淬火和激光熔覆若干关键技术研究［D］.郑州:郑州大学，2003.(Chao Ming-ju.Several key technology of metal surface laser hardening and laser cladding ［D］.Zhengzhou:Zhengzhou University，2003.)
[13]Zhang M，Wang X N，Zhu G J，et al.Effect of laser welding process parameters on microstructure and mechanical properties on butt joint of new hot-rolled nano-scale precipitate strengthen steel［J］.Acta Metallurgica Sinica (English Letters)，2014，27(3):521-529.

[1]	董艳伍，彭飞，田家龙，姜周华. 时效对10Ni10Mn2CuAl钢组织及性能的影响[J]. 东北大学学报（自然科学版）, 2022, 43(5): 646-651.
[2]	宋红宇，刘海涛，王国栋. 薄带连铸取向硅钢的热轧孪生行为[J]. 东北大学学报（自然科学版）, 2022, 43(2): 182-187.
[3]	刘庚，李慧杰，王庆海，叶其斌. 690MPa级海洋平台用特厚齿条钢的回火稳定性[J]. 东北大学学报（自然科学版）, 2022, 43(2): 188-196.
[4]	李美莹，肖乃友，周剑华，贾涛. 合金设计对贝氏体相变动力学影响的建模研究[J]. 东北大学学报（自然科学版）, 2022, 43(11): 1561-1569.
[5]	杨森宇，付天亮，朱美君，王昭东. Q960E超高强钢板控温淬火试验研究与应用[J]. 东北大学学报（自然科学版）, 2022, 43(11): 1570-1574.
[6]	高彩茹，屈兵兵，田余东，杜林秀. 回火温度对在线淬火Q690q桥梁钢显微组织和力学性能的影响[J]. 东北大学学报（自然科学版）, 2021, 42(7): 927-933.
[7]	毕梦园，谢仁义，张艺凡，衣海龙. CoCrFeNi高熵合金组织演变规律及再结晶动力学[J]. 东北大学学报（自然科学版）, 2021, 42(7): 933-938.
[8]	朱成林，高秀华，王明明，宋丽英. 淬火温度对12Cr14Ni2不锈结构钢组织及力学性能的影响[J]. 东北大学学报（自然科学版）, 2021, 42(6): 781-788.
[9]	郗文超，宋博学，梁赢东，于天彪. 原位生成NbC增强YCF102熔覆层热力学与耐磨性研究[J]. 东北大学学报（自然科学版）, 2021, 42(4): 538-543.
[10]	鲍君峰，于月光，贾成厂. ZrO₂添加量对等离子放电烧结制备WC-6Co组织和性能的影响[J]. 东北大学学报（自然科学版）, 2021, 42(1): 43-48.
[11]	王明明，高秀华，杜林秀，张大征. V-N微合金化X80抗大变形管线钢的组织与力学性能[J]. 东北大学学报:自然科学版, 2020, 41(6): 801-806.
[12]	李彦龙，吴琼，秦晓峰，刘常升. Cr5支承辊接触疲劳损伤及其次表层组织变化[J]. 东北大学学报:自然科学版, 2020, 41(6): 818-823.
[13]	张志强，何长树，赵夙，赵骧. 7075-T6合金超声辅助搅拌摩擦焊接头搅拌区组织与力学性能[J]. 东北大学学报:自然科学版, 2020, 41(12): 1708-1714.
[14]	张大征，高秀华，杜林秀，王鸿轩. 多级热处理对柔性立管用高强钢组织性能影响[J]. 东北大学学报:自然科学版, 2020, 41(1): 49-54.
[15]	陈洁，李长生，李坤，涂兴洋. Fe-Mn-1.6Ni-C水电用钢板轧后直接淬火和回火工艺[J]. 东北大学学报:自然科学版, 2019, 40(7): 956-961.

780MPa级微合金钢的激光相变硬化工艺及组织性能

Laser Transformation Hardening Process and Microstructure and Properties of 780 MPa Grade Micro-alloy Steel

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价