基于水平集法的三维非均质岩石建模及水力压裂特性

doi:10.12068/j.issn.1005-3026.2019.01.021

东北大学学报:自然科学版 ›› 2019, Vol. 40 ›› Issue (1): 109-114.DOI: 10.12068/j.issn.1005-3026.2019.01.021

基于水平集法的三维非均质岩石建模及水力压裂特性

李明，史艺涛，李鑫，梁力

(东北大学资源与土木工程学院，辽宁沈阳110819)

收稿日期:2017-10-20 修回日期:2017-10-20 出版日期:2019-01-15 发布日期:2019-01-28
通讯作者: 李明
作者简介:李明(1980-)，男，辽宁沈阳人，东北大学副教授；梁力(1955-)，男，辽宁丹东人，东北大学教授，博士生导师.
基金资助:
中央高校基本科研业务费专项资金资助项目(N170104024)；国家自然科学基金资助项目(51474048).

3D Modeling for Heterogeneous Rock Based on LSM and Characteristics of Hydraulic Fracture Propagation

LI Ming， SHI Yi-tao， LI Xin， LIANG Li

School of Resources & Civil Engineering， Northeastern University， Shenyang 110819， China.

Received:2017-10-20 Revised:2017-10-20 Online:2019-01-15 Published:2019-01-28
Contact: LI Ming
About author:-
Supported by:
-

摘要/Abstract

摘要： 采用水平集法(LSM)描述非均质岩石的静态材料边界特性，探讨分层特性、含有随机分布包裹体特性和具有Weibull分布特性的三种非均质岩石材料有限元建模方法，并与基于完全流-固耦合弹塑性理论的弥散裂缝模型相结合进行水力压裂过程的模拟. 在水力压裂模型中通过Corey关系和相对渗透率计算压裂液与原有液体混合的特性. 最后进行符合Weibull分布的非均质岩石材料的水力压裂传播特性的计算，给出了等效开裂区域的发展过程、注水点处水压力与注水时间变化曲线和有效应力路径. 模拟结果表明，采用水平集法能够有效地描述岩石材料的非均质特性，同时该法能够与弥散裂缝模型很好地结合，实现三维非均质岩石的建模与水力压裂过程的模拟.

关键词: 水力压裂, 水平集法, 弥散裂缝模型, 非均质岩石, 流-固耦合

Abstract: The level set method(LSM)was introduced to describe the static material interface in a rock material. The finite element modeling procedures for the three-dimensional rock sample with the layered feature， randomly distributed inclusions and statistical Weibull distribution heterogeneity were given via the LSM. To study the propagation of hydraulic fracture， a smeared crack model based on the fully coupled， elasto-plastic， pore pressure-solid phase interaction theory was coupled to the LSM. The Corey relation and relative permeability were adopted to calculate the viscosity and permeability of mixture in the smeared cracked hydraulic fracture model. Finally， a case study that simulating hydraulic fracture propagation was carried out in a heterogeneous rock sample following Weibull distribution. The development of equivalent crack zone， pore pressure versus injection time and the effective stress path in the injected element were discussed. The simulation results indicate that the LSM coupling with smeared crack model can be well used for modeling the heterogeneity of three-dimensional rock material and simulating the hydraulic fracturing.

Key words: hydraulic fracturing, level set method(LSM), smeared crack model, heterogeneous rock, fluid-solid coupling

中图分类号:

TV139.1
TE31

李明，史艺涛，李鑫，梁力. 基于水平集法的三维非均质岩石建模及水力压裂特性[J]. 东北大学学报:自然科学版, 2019, 40(1): 109-114.

LI Ming， SHI Yi-tao， LI Xin， LIANG Li. 3D Modeling for Heterogeneous Rock Based on LSM and Characteristics of Hydraulic Fracture Propagation[J]. Journal of Northeastern University Natural Science, 2019, 40(1): 109-114.

参考文献

[1]朱君，叶鹏，王素玲，等.低渗透储层水力压裂三维裂缝动态扩展数值模拟［J］.石油学报，2010，31(1):119-123.(Zhu Jun，Ye Peng，Wang Su-ling，et al.3D numerical simulation of fracture dynamic propagation in hydraulic fracturing of low-permeability reservoir［J］.Acta Petrolei Sinica，2010，31(1):119-123.)
[2]刘建军，冯夏庭，裴桂红.水力压裂三维数学模型研究［J］.岩石力学与工程学报，2003，22(12):2042-2046.(Liu Jian-jun，Feng Xia-ting，Pei Gui-hong.Study on mathematical model of three dimensional hydraulic fracturing［J］.Chinese Journal of Rock Mechanics and Engineering，2003，22(12):2042-2046.)
[3]Priester C，Morton L C，Kinsey S T，et al.Numerical modeling of hydraulic fracture problem in permeable medium using cohesive zone model［J］.Engineering Fracture Mechanics，2012，79(1):312-328.
[4]Ren Q，Dong Y，Yu T.Numerical modeling of concrete hydraulic fracturing with extended finite element method［J］.Science in China Series E:Technological Sciences，2009，52(3):559-565.
[5]Pak A.Numerical modeling of hydraulic fracturing［D］.Edmonton:University of Alberta，1997.
[6]Bazant Z P，Lin F B.Nonlocal smeared cracking model for concrete fracture［J］.Journal of Structure Engineer，1988，114(11):2493-2510.
[7]Hu Y，Chen G，Cheng W，et al.Simulation of hydraulic fracturing in rock mass using a smeared crack model［J］.Computers and Structures，2014，137(6):72-77.
[8]李明，梁力，Guo Pei-jun，等.弥散裂缝模型水力压裂数值方法的网格敏感性分析［J］.东北大学学报(自然科学版)，2015，36(9):1337-1341.(Li Ming，Liang Li，Guo Pei-jun，et al.Mesh sensitivity analysis of solution to hydraulic fracture problems based on a smeared crack model［J］.Journal of Northeastern University(Nature Science)，2015，36(9):1337-1341.)
[9]Li M，Guo P J，Stolle D，et al.Modeling method for a rock matrix with inclusions distributed and hydraulic fracturing characteristics［J］.Journal of Petroleum Science & Engineering，2017，157:409-421.
[10]Osher S，Sethian J A.Fronts propagating with curvature-dependent speed:algorithms based on Hamilton-Jacobi formulations［J］.Journal of Computational Physics，1988，79(1):12-49.
[11]Sukumar N，Chopp D L，Moes N，et al.Modeling holes and inclusions by level sets in the extended finite-element method［J］.Computer Methods in Applied Mechanics and Engineering，2001，190(46):6183-6200.
[12]Marrone S，Colagrossi A，Touzé D L，et al.Fast free-surface detection and level-set function definition in SPH solvers［J］.Journal of Computational Physics，2010，229(10):3652-3663.
[13]Myslinski A.Level set method for optimization of contact problems［J］.Engineering Analysis with Boundary Elements，2008，32(11):986-994.
[14]Stolarska M，Chopp D L.Modeling thermal fatigue cracking in integrated circuits by level sets and the extended finite element method［J］.International Journal of Engineering Science，2003，41(20):2381-2410.
[15]Li M，Guo P J，Stolle D，et al.Development of hydraulic fracture zone in heterogeneous material based on smeared crack method［J］.Journal of Natural Gas Science & Engineering，2016，35:761-774.
[16]Corey A T.The interrelation between gas and oil relative permeabilities［J］.Producers Monthly，1954，19:38-41.

基于水平集法的三维非均质岩石建模及水力压裂特性

3D Modeling for Heterogeneous Rock Based on LSM and Characteristics of Hydraulic Fracture Propagation

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 12

编辑推荐

Metrics

本文评价

[1]	李明，陈昭，赵岐，梁力. 基于PHF-LSM模型岩石分段水力压裂应力阴影效应[J]. 东北大学学报（自然科学版）, 2022, 43(11): 1613-1622.
[2]	李明，赵岐，陈昭，梁力. 基于PHF-LSM-MT法岩石材料细观边界建模与水力裂缝扩展研究[J]. 东北大学学报（自然科学版）, 2022, 43(10): 1461-1468.
[3]	李明，赵岐，张砚琨，梁力. 基于PHF-LSM-MT的非均质岩石细观界面与水力压裂数值建模[J]. 东北大学学报（自然科学版）, 2021, 42(8): 1127-1135.
[4]	李明，张砚琨，赵岐，梁力. 基于EPHF模型均质多孔岩石材料水力压裂特性[J]. 东北大学学报（自然科学版）, 2021, 42(7): 996-1004.
[5]	张洪伟，张通，万志军，周长冰. 高温高压下岩石水力压裂实验新型封隔技术[J]. 东北大学学报（自然科学版）, 2021, 42(3): 422-428.
[6]	赵帅，孙友宏，杨秦川，李强. 非稳态原位热解扶余油页岩热-流耦合模拟[J]. 东北大学学报:自然科学版, 2019, 40(6): 896-902.
[7]	程玉刚，卢义玉，葛兆龙，仲建宇. 孔隙水压力梯度对煤层导向压裂控制影响[J]. 东北大学学报:自然科学版, 2017, 38(7): 1043-1048.
[8]	夏彬伟，杨冲，卢义玉，宋晨鹏. 页岩气储层水力裂缝网络的延伸规律[J]. 东北大学学报:自然科学版, 2016, 37(8): 1193-1198.
[9]	李明，梁力， GUO Pei-jun，李鑫. 弥散裂缝模型水力压裂数值方法的网格敏感性分析[J]. 东北大学学报:自然科学版, 2015, 36(9): 1337-1341.
[10]	宋晨鹏，卢义玉，贾云中，夏彬伟. 煤岩交界面对水力压裂裂缝扩展的影响[J]. 东北大学学报:自然科学版, 2014, 35(9): 1340-1344.
[11]	宋晨鹏，卢义玉，夏彬伟，胡科. 天然裂缝对煤层水力压裂裂缝扩展的影响[J]. 东北大学学报:自然科学版, 2014, 35(5): 756-760.
[12]	冷雪峰;唐春安;李连崇;杨天鸿. 非均匀孔隙压力下水压致裂的数值试验[J]. 东北大学学报(自然科学版), 2003, 24(3): 288-291.