QIU Ningjia， LI Mingzhe， LI Renjun. Roll Shape Calculation of Flexible Rolling for 3D Curved Surface Metal Plates[J]. Journal of Northeastern University Natural Science, 2014, 35(5): 690-694.
[1] Yoon S J，Yang D Y.Development of a highly flexible incremental roll forming process for the manufacture of a doubly curved sheet metal［J］.CIRP Annals:Manufacturing Technology，2003，52(1):201/204. [2] 李光耀，王唬，杨旭静，等.板材冲压成形工艺与模具设计制造中的若干前沿技术［J］.机械工程学报，2010，46(10):31/38.(Li Guangyao，Wang Hu，Yang Xujing，et al.Some new topics on process design and mould manufacture for sheet metal forming［J］.Journal of Mechanical Engineering，2010，46(10):31/38.) [3] Aye M.An analytical model for predicting dryout point in bilaterally heated vertical narrow annuli［J］.Nuclear Science and Techniques，2005，16(1):59/64. [4] Li M Z，Cai Z Y，Sui Z，et al.Multipoint forming technology for sheet metal［J］.Journal of Materials Processing Technology，2002，12(9):333/338. [5] Cai Z Y，Li M Z，Hu Z Q.Theoretical analysis and springback control of continuous flexible forming technology for threedimensional surface parts［J］.China High Technology Letter，2011，21(1):120/127. [6] Hu Z Q，Li M Z，Cai Z Y，et al.Continuous flexible forming of threedimensional surface parts using bendable rollers［J］.Materials Science and Engineering，2009，49(9):234/237. [7] Cai Z Y，Li M Z.Principle and theoretical analysis of continuous roll forming for threedimensional surface parts［J］.Science China:Technological Sciences，2013，56(2):351/358. [8] Gong X P，Li M Z，Lu Q P，et al.Research on continuous multipoint forming method for rotary surface［J］.Journal of Materials Processing Technology，2012，212(1):227/236. [9] 李明哲，蔡中义，李任君，等.基于弯曲辊轧制的曲面零件连续成形方法［J］.机械工程学报，2012，48(14):44/49.(Li Mingzhe，Cai Zhongyi，Li Renjun，et al.Continuous forming method for threedimensional surface parts based on the rolling process using bended roll［J］.Journal of Mechanical Engineering，2012，48(14):44/49.)
