WANG Bo， LI Bai-chun， YANG Jian-yu， WANG Wan-shan. Milling Force Coefcient Identication for Multi-axis and Ball-End Milling Cutter[J]. Journal of Northeastern University Natural Science, 2018, 39(11): 1630-1635.
[1]Lee P，Altinta Y.Prediction of ball-end milling forces from orthogonal cutting data［J］.International Journal of Machine Tools and Manufacture，1996，36(9):1059-1072.
[2]Abainia S，Bey M，Moussaoui N，et al.Prediction of milling forces by integrating a geometric and a mechanistic model［C］//Proceedings of the World Congress on Engineering.London，2012:4-6.
[3]Tuysuz O，Altintas Y，Feng H Y.Prediction of cutting forces in three and five-axis ball-end milling with tool indentation effect［J］.International Journal of Machine Tools and Manufacture，2013，66:66-81.
[4]Geng L，Liu P L，Liu K.Optimization of cutter posture based on cutting force prediction for five-axis machining with ball-end cutters［J］.The International Journal of Advanced Manufacturing Technology，2015，78(5/6/7/8):1289-1303.
[5]Altinta Y，Armarego E J A.Prediction of milling force coefficients from orthogonal cutting data［J］.Transactions of the ASME，1996，118:216-224.
[6]Gonzalo O，Beristain J，Jauregi H，et al.A method for the identification of the specific force coefficients for mechanistic milling simulation［J］.International Journal of Machine Tools and Manufacture，2010，50(9):765-774.
[7]Cao Q，Zhao J，Han S，et al.Force coefficients identification considering inclination angle for ball-end finish milling［J］.Precision Engineering，2012，36(2):252-260.
[8]Wang M，Gao L，Zheng Y.An examination of the fundamental mechanics of cutting force coefficients［J］.International Journal of Machine Tools and Manufacture，2014，78:1-7.
[9]Wojciechowski S.The estimation of cutting forces and specific force coefficients during finishing ball end milling of inclined surfaces［J］.International Journal of Machine Tools and Manufacture，2015，89:110-123.
[10]Dikshit M K，Puri A B，Maity A，et al.Determining cutting force coefficients from instantaneous cutting forces in ball end milling［J］.International Journal of Machining and Machinability of Materials，2016，18(5/6):552-571.
[11]黎柏春，王振宇，王国勋，等.基于瞬时铣削力的球头铣刀铣削力系数辨识［J］.东北大学学报(自然科学版)，2016，37(5):678-682.(Li Bai-chun，Wang Zhen-yu，Wang Guo-xun，et al.Milling force coefficient identification of ball-end milling based on instantaneous milling forces［J］.Journal of Northeastern University(Natural Science)，2016，37(5):678-682.)
