YAN Yu-tao, JIANG Cheng, GAO Lian-qi. Life Analysis of Coupling Damage Between Sliding Wear and Contact Fatigue Based on Morris Method[J]. Journal of Northeastern University(Natural Science), 2023, 44(7): 964-971.
[1]Sosnovskiy L A.Tribo-fatigue,wear-fatigue damage and its prediction[M].Berlin: Springer-Verlag,2005: 119-128. [2]Zhang J,Wang D G,Song D Z,et al.Tribo-fatigue behaviors of steel wire rope under bending fatigue with the variable tension[J].Wear,2019,428/429:154-161. [3]Yan Y T,Jiang C,Li W D.Simulation on coupling effects between surface wear and fatigue in spur gear[J].Engineering Failure Analysis,2022,134:106055. [4]Zeng D F,Zhang Y B,Lu L T,et al.Fretting wear and fatigue in press-fitted railway axle:a simulation study of the influence of stress relief groove[J].International Journal of Fatigue,2019,118:225-236. [5]Xue X Z,Huo Q X,Hong L.Fretting wear-fatigue life prediction for aero-engine’s involute spline couplings based on abaqus[J].Journal of Aerospace Engineering,2019,32(6):04019081. [6]O’Halloran S M,Shipway P H,Connaire A D,et al.A combined wear-fatigue design methodology for fretting in the pressure armour layer of flexible marine risers[J].Tribology International,2017,108:7-15. [7]黄乐烽,杜坤,宋志刚,等.基于Morris法的供水管网全局灵敏度分析[J].工业安全与环保,2021,47(6):103-106.(Huang Le-feng,Du Kun,Song Zhi-gang,et al.Global sensitivity analysis of water distribution network model based on Morris method[J].Industrial Safety and Environmental Protection,2021,47(6):103-106.) [8]Meghoe A,Loendersloot R,Tinga T.Rail wear and remaining life prediction using meta-models[J].International Journal of Rail Transportation,2020,8(1):1-26. [9]Velarde J,Kramhft C,Srensen J D.Global sensitivity analysis of offshore wind turbine foundation fatigue loads[J].Renewable Energy,2019,140:177-189. [10]Glode S,Ren Z,Flaker J.Simulation of surface pitting due to contact loading[J].International Journal for Numerical Methods in Engineering,1998,43(1):33-50. [11]Brando J A,Martins R,Seabra J H O,et al.An approach to the simulation of concurrent gear micropitting and mild wear[J].Wear,2015,324:64-73. [12]Sum W S,Williams E J,Leen S B.Finite element,critical-plane,fatigue life prediction of simple and complex contact configurations[J].International Journal of Fatigue,2005,27(4):403-416. [13]Santecchia E,Hamouda A M S,Musharavati F,et al.A review on fatigue life prediction methods for metals[J].Advances in Materials Science and Engineering,2016,2016:9573524. [14]Osman T,Velex P.A model for the simulation of the interactions between dynamic tooth loads and contact fatigue in spur gears[J].Tribology International,2012,46(1):84-96. [15]Richard H A,Fulland M,Sander M.Theoretical crack path prediction[J].Fatigue & Fracture of Engineering Materials & Structure,2005,28(1/2):3-12. [16]周兵,黄晓婷,耿元.基于Morris法分析的液压参数对互联悬架的影响[J].湖南大学学报(自然科学版),2016,43(2):70-76.(Zhou Bing,Huang Xiao-ting,Geng Yuan.Influence of hydraulic parameters on hydraulically interconnected suspension based on Morris[J].Journal of Hunan University (Natural Sciences),2016,43(2):70-76.) [17]Liu H L,Liu H J,Zhu C C,et al.Study on gear contact fatigue failure competition mechanism considering tooth wear evolution[J].Tribology International,2020,147:106277.