LIN Chao， WANG Yantao. Principle and Design of Noncircular PinCycloid Gear Transmission[J]. Journal of Northeastern University Natural Science, 2014, 35(8): 1190-1194.
[1] Litvin F L.Gear geometry and applied theory［M］.New York:Prentice Hall，1994. [2] Chen B K，Zhong H，Liu J Y，et al.Generation and investigation of a new cycloid drive with double contact［J］.Mechanism and Machine Theory，2012，49:270/283. [3] Litvin F L，Demenego A，Vecchiato D.Formation by branches of envelope to parametric families of surfaces and curves［J］.Computer Methods in Applied Mechanics and Engineering，2001，190(35/36):4587/4608. [4] Demenego A，Vecchiato D，Litvin F L，et al.Design and simulation of meshing of a cycloidal pump［J］.Mechanism and Machine Theory，2002，37(3):311/332. [5] Vecchiato D，Demenego A，Argyris J，et al.Geometry of a cycloidal pump［J］.Computer Methods in Applied Mechanics and Engineering，2001，190(18/19):2309/2330. [6] Shin J H，Kwon S M.On the lobe profile design in a cycloid reducer using instant velocity center［J］.Mechanism and Machine Theory，2006，41(5):596/616. [7] Shin J H，Chang S，Kwon S M，et al.New shape design method of an epicycloidal gear for an epicycloid drive［C］// ICMIT 2005:Mechatronics，MEMS，and Smart Materials.［Sl］:SPIE，2005:60401G1/G6. [8] Lin C，Gong H，Nie N，et al.Geometry design，threedimensional modeling and kinematic analysis of orthogonal fluctuating gear ratio face gear drive［J］.Proceedings of the Institution of Mechanical Engineers Part C:Journal of Mechanical Engineering Science，2013，227(4):779/793. [9] 李建刚，吴序堂，毛世民，等.非圆齿轮齿廓数值计算的研究［J］.西安交通大学学报，2005，39(1):75/78.(Li Jiangang，Wu Xutang，Mao Shimin，et al.Numerical computation of tooth profile of noncircular gear［J］.Journal of Xi’an Jiaotong University，2005，39(1):75/78.)
