Journal of Northeastern University:Natural Science ›› 2017, Vol. 38 ›› Issue (5): 661-666.DOI: 10.12068/j.issn.1005-3026.2017.05.011

• Materials & Metallurgy • Previous Articles     Next Articles

Analysis of Flue Gas SO2 Distribution and Influencing Factors During Sintering Process

JIA Feng-rui1,2, WANG En-gang1, HE Ji-cheng1, DONG Hui1   

  1. 1. School of Metallurgy, Northeastern University, Shenyang 110819, China; 2. College of Petroleum Engineering, Liaoning Shihua University, Fushun 113001, China.
  • Received:2016-05-31 Revised:2016-05-31 Online:2017-05-15 Published:2017-05-11
  • Contact: JIA Feng-rui
  • About author:-
  • Supported by:

    -

Abstract:

Based on the SO2 absorption-emission mechanism, a model for computing flue gas SO2 concentration distribution during sintering was established. After the comparison of the computional results and the in-site data from a 360m2 sinter machine in China, the model was validated. Then, the factors influencing on the flue gas distribution were investigated, including the sinter-bed height, speed, carbon content and moisture content. The results indicate that the flue gas SO2 distributes as a Cubic curve along the sinter machine length. The peak value of the SO2 concentration arrives earlier with higher carbon content and lower sinter-bed height, slower speed and lower moisture content, and the first three ones affect the flue gas SO2 concentration more. The SO2 concentration from the top to one-third of the sinter machine in the length direction is less 200mg/m3, when the sinter-bed height, sinter-bed speed and the moisture and carbon content is, 650~700mm, 2.3m/min, 7%and 3%,respectively.

Key words: flue gas, SO2 concentration, influencing factor, sintering process, SO2 distribution

CLC Number: