东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2004, Vol. 25 ›› Issue (5): 409-411.DOI: -

• 论著 •    下一篇

HSLA钢热轧板带组织性能预测数学模型及软件开发

张良哲;吴迪;赵宪明   

  1. 东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室;东北大学轧制技术及连轧自动化国家重点实验室 辽宁沈阳　110004
  • 收稿日期:2013-06-24 修回日期:2013-06-24 出版日期:2004-05-15 发布日期:2013-06-24
  • 通讯作者: Zhang, L.-Z.
  • 作者简介:-
  • 基金资助:
    国家自然科学基金资助项目(50334010)

Prediction modelling and software developed for microstructure and properties of hot-roll strip steel

Zhang, Liang-Zhe (1); Wu, Di (1); Zhao, Xian-Ming (1)   

  1. (1) Lab. of Rolling and Automat., Northeastern Univ., Shenyang 110004, China
  • Received:2013-06-24 Revised:2013-06-24 Online:2004-05-15 Published:2013-06-24
  • Contact: Zhang, L.-Z.
  • About author:-
  • Supported by:
    -

RichHTML

1

PDF (PC)

732

摘要： 以物理冶金学原理为理论基础,研究了HSLA钢热轧板带生产过程中发生的再结晶、析出、相变等各种冶金学现象的数学模型·对影响板带组织性能的参数进行定量计算,开发出符合实际生产工艺要求的组织性能预测软件,对轧后板带性能进行预测·计算结果与实际测量结果比较,吻合较好·使用该软件对轧后产品的组织性能进行预测,可以节省大量的人力物力,此外该软件操作方便,界面友好,易于维护,因此有广阔的应用前景·

关键词: HSLA钢, 热轧, 数学模型, 软件, 微观组织, 力学性能

Abstract: Based on the physical-metallurgical theory, the recrystallization, precipitation and phase transformation were modelled in the hot-rolling process of HSLA steel strip. As a result, the parameters of both microstructure and properties can be calculated quantitatively, with a software developed to predict them in accordance to actual technological process. The results showed a good agreement with those measured experimentally. The software can greatly save time and cost, and it is easy to use and maintain. So the software has good prospects in application.

中图分类号: