东北大学学报（自然科学版）

东北大学学报(自然科学版) ›› 2013, Vol. 34 ›› Issue (4): 520-523.DOI: -

• 材料与冶金 • 上一篇    下一篇

不同工艺下低碳马氏体钢的组织与力学性能

厉英，崔绍刚，马北越，刘沿东   

  1. (东北大学材料与冶金学院，辽宁沈阳110819)
  • 收稿日期:2012-10-15 修回日期:2012-10-15 出版日期:2013-04-15 发布日期:2013-06-19
  • 通讯作者: 厉英
  • 作者简介:厉英(1963-)，女，安徽合肥人，东北大学教授，博士生导师.
  • 基金资助:
    国家科技支撑计划重点项目(2011BAE13B03)；国家自然科学基金资助项目(51274057).

Microstructure and Mechanical Properties of LowCarbon Martensite Steel Under Different Processes

LI Ying， CUI Shaogang， MA Beiyue， LIU Yandong   

  1. School of Materials ＆ Metallurgy， Northeastern University， Shenyang 110819， China.
  • Received:2012-10-15 Revised:2012-10-15 Online:2013-04-15 Published:2013-06-19
  • Contact: LI Ying
  • About author:-
  • Supported by:
    -

RichHTML

0

PDF (PC)

1322

摘要： 研究了淬火温度和保温时间对低碳马氏体钢组织、抗拉强度和屈服强度的影响.结果表明，淬火温度和保温时间对试样的组织和力学性能影响显著；在890℃下保温70和210s淬火试样的组织主要为板条状马氏体和块状铁素体；在920和950℃下保温210s淬火，其组织为板条状全马氏体；在920℃下保温70~210s淬火试样具有良好的力学性能.

关键词: 低碳马氏体钢, 淬火工艺, 组织, 力学性能, 淬火温度

Abstract: The effects of the quenching temperature and holding time on the microstructure， tensile strength and yield strength of the lowcarbon martensite steel were investigated. The research results showed that the quenching temperature and holding time had an obvious influence on the microstructure and mechanical properties of the samples. The microstructures of the samples quenched at 890℃ for 70s and 210s mainly consisted of lath martensite and massive ferrite. The whole lath martensite microstructure was observed while quenched at 920℃ and 950℃ holding for 210s. The sample quenched at 920℃ holding for 70~210s had good mechanical properties.

Key words: lowcarbon martensite steel, quenching process, microstructure, mechanical properties, quenching temperature

中图分类号: