考虑失效模式相关性的机械系统可靠性分析

doi:10.12068/j.issn.1005-3026.2017.10.017

东北大学学报:自然科学版 ›› 2017, Vol. 38 ›› Issue (10): 1453-1458.DOI: 10.12068/j.issn.1005-3026.2017.10.017

考虑失效模式相关性的机械系统可靠性分析

涂宏茂^1,2，孙志礼¹，姬广振²，钱云鹏^1,2

(1．东北大学机械工程与自动化学院，辽宁沈阳110819; 2．中国兵器科学研究院，北京100089)

收稿日期:2016-04-11 修回日期:2016-04-11 出版日期:2017-10-15 发布日期:2017-10-13
通讯作者: 涂宏茂
作者简介:涂宏茂(1981-)，男，福建泉州人，东北大学博士研究生，中国兵器科学研究院副研究员；孙志礼(1957-)，男，山东巨野人，东北大学教授，博士生导师；姬广振(1971-)，男，江苏徐州人，中国兵器科学研究院研究员.
基金资助:
国家国防科工局资助项目(Z092014B001).

Reliability Analysis for Mechanical System with Correlated Failure Modes

TU Hong-mao^1,2， SUN Zhi-li¹， JI Guang-zhen²， QIAN Yun-peng^1,2

1. School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China; 2. Ordnance Science and Research Academy of China， Beijing 100089， China.

Received:2016-04-11 Revised:2016-04-11 Online:2017-10-15 Published:2017-10-13
Contact: TU Hong-mao
About author:-
Supported by:
-

摘要/Abstract

摘要： 考虑失效模式相关性对机械系统可靠性的影响，提出了一种基于FORM(first order reliability methods)近似的系统可靠性分析方法及其实施流程.采用FORM计算系统各失效模式的可靠度和灵敏度，在此基础上，获得用于衡量失效模式相关性的相关系数矩阵.将系统可靠性模型求解转化为多维正态积分计算，进而采用高效的近似方法获得系统可靠度.给出失效模式灵敏度和随机变量灵敏度的定义及其相应的计算方法.算例结果表明:该方法能够获得较为准确的系统可靠度，且具有较高的计算效率，能够有效识别关键失效模式和随机影响因素.

Abstract: To evaluate the effect of failure mode correlations on the mechanical system reliability， a system reliability analysis method and its implementation procedures were proposed based on FORM approximation. FORM was used to calculate the reliabilities and sensitivities of all the failure modes in the system， and then the failure mode correlation coefficient matrix for determining how they are correlated was obtained. The solving of the system reliability model was converted to the integration of multivariate normal distributions， and the efficient approximation algorithm was used to get reliability degree. The definition of failure mode sensitivity and the corresponding calculation method were proposed based on the numerical difference， as well as the definition of random parameter sensitivity and its calculation method through the composite derivative theorem. The results demonstrated the efficiency of the proposed method for quantifying the mechanical system reliability with failure mode correlations， and also the feasibility for identifying the key failure modes and random parameters.

Key words: failure mode correlations, system reliability, reliability analysis, sensitivity analysis, correlation coefficient matrix, multi-normal integration

中图分类号:

TB114.3

涂宏茂，孙志礼，姬广振，钱云鹏. 考虑失效模式相关性的机械系统可靠性分析[J]. 东北大学学报:自然科学版, 2017, 38(10): 1453-1458.

TU Hong-mao， SUN Zhi-li， JI Guang-zhen， QIAN Yun-peng. Reliability Analysis for Mechanical System with Correlated Failure Modes[J]. Journal of Northeastern University Natural Science, 2017, 38(10): 1453-1458.

参考文献

[1]Grooteman F.An adaptive directional importance sampling method for structural reliability ［J］.Probabilistic Engineering Mechanics，2011，26(2):134-141.
[2]佟操，孙志礼，杨丽，等.一种基于Kriging和Monte Carlo的主动学习可靠度算法［J］.航空学报，2015，36 (9):2992-3001.(Tong Cao，Sun Zhi-li，Yang Li，et al.An active learning reliability method based on Kriging and Monte Carlo ［J］.Acta Aeronautica et Astronautica Sinica，2015，36(9):2992-3001.)
[3]Ahmed S，Koo B.Improved reliability bounds of structural systems ［J］.Journal of Structural Engineering，1990，116(11):3138-3147.
[4]Phani R.Bounds on structural system reliability in the presence of interval variables ［J］.Computers & Structures，2007，85(5/6):320-329.
[5]Xu L，Cheng G D.Discussion on moment methods for structural reliability ［J］.Structural Safety，2003，25(3):193-199.
[6]Ditlevsen O，Madsen H O.Structural reliability methods ［M］.West Sussex:John Wiley & Sons Ltd.，2007:94-101.
[7]Melchers R E.Structural reliability:analysis and prediction ［M］.Chichester:John Wiley & Sons Ltd.，1999:87-110.
[8]Melchers R E.Modeling complex engineering structures ［M］.Reston:American Society of Civil Engineers，2007.
[9]Pandey M D，Sarkar A.Comparison of a simple approximation for multinormal integration with importance sampling-based simulation method ［J］.Probabilistic Engineering Mechanics，2002，17:215-218.
[10]Nadarajah S.On the approximations for multinormal integration ［J］.Computers & Industrial Engineering，2008，54(3):705-708.
[11]Pandey M D.An effective approximation to evaluate multinormal integrals ［J］.Structural Safety，1998，20:51-67.
[12]Yuan X X，Pandey M D.Analysis of approximation for multinormal integration in system reliability computation ［J］. Structural Safety，2006，28:361-377.
[13]涂宏茂，钱云鹏，姬广振，等.改进的结构系统可靠度的条件边缘乘积法［J］.工程力学，2012(10):321-326.(Tu Hong-mao，Qian Yun-peng，Ji Guang-zhen，et al.An improved product of conditional marginal method for structural system reliability analysis［J］.Engineering Mechanics，2012(10):321-326.)
[14]Torng T Y，Wu Y T，Millwater H R.Structural system reliability calculation using a probabilistic fault tree analysis method ［C］// 33rd Structures，Structural Dynamics and Materials Conference.Washington D C，1992:603-613.
[15]Ben H.Probabilistic engineering analysis using the NESSUS software ［J］.Structural Safety，2006，28:83-107.
[16]Georgios P.Efficient method for probabilistic finite element analysis with application to reinforced concrete slabs ［J］.Engineering Structures，2015，103:85-101.

考虑失效模式相关性的机械系统可靠性分析

Reliability Analysis for Mechanical System with Correlated Failure Modes

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	柳军，郝丽玲，何光宇，徐礼胜. 一种左心室压力个性化估计模型参数子集选择方法[J]. 东北大学学报（自然科学版）, 2022, 43(8): 1080-1088.
[2]	孙尧，孙志礼，周杰，王健. 多状态多阶段任务系统的可靠度理论计算方法[J]. 东北大学学报（自然科学版）, 2022, 43(5): 689-695.
[3]	杨周，朴银成，权哲优. 盘式制动器热-机耦合渐变可靠性灵敏度分析[J]. 东北大学学报（自然科学版）, 2022, 43(1): 48-56.
[4]	曹汝男，孙志礼，郭凡逸，王健. 基于Kriging和Monte Carlo的动态可靠性算法[J]. 东北大学学报（自然科学版）, 2021, 42(5): 658-664.
[5]	刘博林，谢里阳. 一种改进的全局可靠性分析方法[J]. 东北大学学报:自然科学版, 2020, 41(7): 943-948.
[6]	于震梁，孙志礼，张毅博，王健. 一种自适应PC-Kriging模型的结构可靠性分析方法[J]. 东北大学学报:自然科学版, 2020, 41(5): 667-672.
[7]	曹汝男，孙志礼，张毅博，王健. 基于主动学习的复杂机械结构的可靠性分析[J]. 东北大学学报:自然科学版, 2020, 41(2): 223-228.
[8]	张毅博，孙志礼，闫玉涛，王健. 一种基于失效概率相对误差估计的可靠性分析方法[J]. 东北大学学报:自然科学版, 2020, 41(2): 229-234.
[9]	杨周，郭丙帅，张义民，顾洛玮. 基于随机载荷和强度退化的可靠性灵敏度分析[J]. 东北大学学报:自然科学版, 2019, 40(5): 678-683.
[10]	于震梁，孙志礼，曹汝男，张毅博. 基于PC-Kriging模型与主动学习的齿轮热传递误差可靠性分析[J]. 东北大学学报:自然科学版, 2019, 40(12): 1750-1754.
[11]	罗忠;梁乐;陈燕燕;李少杰;. 细长机械臂的刚度灵敏度分析与参数优化[J]. 东北大学学报(自然科学版), 2011, 32(9): 1319-1323.
[12]	陈鹏霏;孙志礼;袁哲;. 基于雷诺方程的滑动轴承可靠性虚拟试验方法[J]. 东北大学学报(自然科学版), 2010, 31(2): 253-256.
[13]	史妍妍;孙志礼;闫明;. 响应面方法在可靠性灵敏度计算中的应用[J]. 东北大学学报(自然科学版), 2009, 30(2): 270-273.
[14]	杨英;赵广耀;孟凡亮;. 某轿车白车身结构灵敏度分析及优化设计[J]. 东北大学学报(自然科学版), 2008, 29(8): 1159-1163.
[15]	刘兴刚;张国志;郝丽娜;李山青;. 冷连轧轧制力仿真模型的可信度评估[J]. 东北大学学报(自然科学版), 2008, 29(4): 537-540.