东北大学学报(自然科学版) ›› 2025, Vol. 46 ›› Issue (2): 35-41.DOI: 10.12068/j.issn.1005-3026.2025.20230261
收稿日期:
2023-09-07
出版日期:
2025-02-15
发布日期:
2025-05-20
通讯作者:
周晓光
作者简介:
周晓光(1978—),男,辽宁辽中人,东北大学副教授,博士生导师基金资助:
Xiao-guang ZHOU(), Jin-fan ZHAO, Shan JIANG, Guang-ming CAO
Received:
2023-09-07
Online:
2025-02-15
Published:
2025-05-20
Contact:
Xiao-guang ZHOU
摘要:
为建立多道次变形条件下V-N微合金钢的流变应力模型,采用DIL805热膨胀相变仪对实验钢进行了多道次压缩实验,并绘制了应力-应变曲线.Hensel-Spittel模型高精度地模拟了实验钢在单道次变形条件下的流变应力.当变形温度和应变速率不变时,采用遗传算法优化了多道次变形条件下Hensel-Spittel模型参数.基于支持向量机(support vector machine,SVM)算法建立了变形前静态再结晶体积分数、变形前奥氏体晶粒尺寸、位错密度、变形温度和应变速率与模型参数的对应关系.结果表明,多道次变形条件下流变应力预测值与实测值吻合良好.研究结果为精准描述多道次变形条件下V-N微合金钢的流变应力提供了有力的支持.
中图分类号:
周晓光, 赵金帆, 姜珊, 曹光明. 多道次变形条件下V-N微合金钢的流变应力模型[J]. 东北大学学报(自然科学版), 2025, 46(2): 35-41.
Xiao-guang ZHOU, Jin-fan ZHAO, Shan JIANG, Guang-ming CAO. Flow Stress Model for V-N Microalloyed Steel Under Multi-pass Deformation Conditions[J]. Journal of Northeastern University(Natural Science), 2025, 46(2): 35-41.
a0 | a1 | a2 | a3 | a4 |
---|---|---|---|---|
8 119.545 | -2.567 | 0.098 | 0.402 | -1.171 |
表1 流变应力模型的回归参数
Table 1 Regression parameters of the flow stress model
a0 | a1 | a2 | a3 | a4 |
---|---|---|---|---|
8 119.545 | -2.567 | 0.098 | 0.402 | -1.171 |
A | n1 | n2 | n3 | Q/(J·mol-1) |
---|---|---|---|---|
6.58×10-34 | -12.27 | -1.058 | 3.720 97 | 423 057 |
表2 t0.5公式中的参数
Table 2 Parameters of t0.5 equation
A | n1 | n2 | n3 | Q/(J·mol-1) |
---|---|---|---|---|
6.58×10-34 | -12.27 | -1.058 | 3.720 97 | 423 057 |
1 | Zhao B C, Zhao T, Huang L, et al. Effect of nitrogen content on the static recrystallization and precipitation behaviors of vanadium-titanium microalloyed steels[J]. International Journal of Materials Research, 2024, 115(6) :411-420. |
2 | Li N, Li L X, Wang C F, et al. Study of precipitation in the heavy plate of VN micro-alloyed HSLA steel[J]. Advanced Materials Research, 2013, 712/713/714/715: 65-69. |
3 | Chumanov I V, Sedukhin V V. Effect of vanadium alloying on the phase composition of super duplex steel[J]. Russian Metallurgy(Metally), 2023(8):1165-1169. |
4 | Kawamura M, Ogawa T, Sun F, et al. Evaluation of the tensile properties of vanadium-added steels with different ferrite and pearlite hardness ratios[J]. Journal of Materials Engineering and Performance, 2024, 33(13):6816-6824. |
5 | Ashtiani H R R, Shahsavari P. Constitutive modeling of flow behavior of precipitation-hardened AA7022-T6 aluminum alloy at elevated temperature[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(11): 2927-2940. |
6 | Gong B, Duan X W, Liu J S, et al. A physically based constitutive model of as-forged 34CrNiMo6 steel and processing maps for hot working[J]. Vacuum, 2018, 155: 345-357. |
7 | Phatiwach V, Angkurarach L, Juijerm P. Effect of intercritical annealing on deformation behavior and flow stress predictive models of AISI 8620 steel[J]. Journal of Materials Science, 2023, 58(33): 13488-13501. |
8 | Chalimba S A J, Mostert R J, Stumpf W E, et al. Modeling of high-temperature flow stress of VN and Nb-Ti microalloyed steels during hot compressive deformation[J]. Journal of Materials Engineering and Performance, 2020, 29(1): 330-341. |
9 | 杨浩, 周晓光, 刘振宇, 等. EH36船板钢的动态再结晶和变形抗力[J]. 东北大学学报(自然科学版), 2012, 33(4): 504-508. |
Yang Hao, Zhou Xiao-guang, Liu Zhen-yu, et al. Dynamic recrystallization and deformation resistance of EH36 ship plate steel[J]. Journal of Northeastern University (Natural Science), 2012, 33(4): 504-508. | |
10 | 汪雅婷, 黎俊良, 袁楷峰, 等. 基于GA改进BP神经网络预测热变形流变应力模型的建立[J]. 材料工程, 2022, 50(6): 170-177. |
Wang Ya-ting, Li Jun-liang, Yuan Kai-feng, et al. Establishment of hot deformation flow stress prediction model based on GA improved BP neural network[J]. Journal of Materials Engineering, 2022, 50(6): 170-177. | |
11 | 肖罡, 杨钦文, 许征兵, 等. 基于克里金方法的6013铝合金多道次降温热压缩变形行为建模[J]. 机械工程材料, 2016, 40(3): 89-92. |
Xiao Gang, Yang Qin-wen, Xu Zheng-bing, et al. Modeling for multi-pass temperature-drop hot compression behavior of 6013 aluminum alloy based on Kriging method[J]. Materials for Mechanical Engineering, 2016, 40(3): 89-92. | |
12 | Chen R C, Zeng J, Yao G C, et al. Flow-stress model of 300M steel for multi-pass compression[J]. Metals, 2020, 10(4):438-453. |
13 | 冯耀耀, 王庆娟, 杜忠泽, 等. 曲轴用非调质钢49MnVS3的变形抗力模型研究[J]. 热加工工艺, 2018, 47(18): 45-48. |
Feng Yao-yao, Wang Qing-juan, Du Zhong-ze, et al. Study on deformation resistance model of 49MnVS3 non-quenched and tempered steel for crankshaft[J]. Hot Working Technology, 2018, 47(18): 45-48. | |
14 | Elwazri A M, Wanjara P, Yue S. Metadynamic and static recrystallization of hypereutectoid steel[J]. ISIJ International, 2003, 43(7): 1080-1088. |
15 | Stewart G R, Jonas J J. Static and dynamic strain aging at high temperatures in 304 stainless steel[J]. ISIJ International, 2004, 44(7): 1263-1272. |
16 | 周晓光. 含Nb钢FTSR热轧板带组织性能预测的研究 [D]. 沈阳:东北大学,2007. |
Zhou Xiao-guang. Research on prediction of microstructure and mechanical properties of hot rolled Nb bearing steels in FTSR [D]. Shenyang: Northeastern University, 2007. | |
17 | Cho S H, Kang K B, Jonas J J. Mathematical modeling of the recrystallization kinetics of Nb microalloyed steels[J]. ISIJ International, 2001, 41(7): 766-773. |
18 | 李治华, 许云波, 吴迪, 等. C-Mn钢高温变形过程再结晶及位错密度的研究[J]. 钢铁研究, 2004, 32(4): 35-38. |
Li Zhi-hua, Xu Yun-bo, Wu Di, et al. Investigation on recrystallization and dislocation density in high temperature deformed of C-Mn steel[J]. Research on Iron and Steel, 2004, 32(4): 35-38. |
[1] | 单泉, 张顺, 黄建聪, 陈砚. 上肢康复机器人模糊自适应交互控制研究[J]. 东北大学学报(自然科学版), 2024, 45(7): 974-983. |
[2] | 李杰, 贾长旺, 乔斌, 刘佳勇. 汽车转向非线性平衡点遗传算法求解及其改进[J]. 东北大学学报(自然科学版), 2023, 44(12): 1726-1733. |
[3] | 支卫军 , 姚赞, 姜周华. 高碳镀锌钢丝组织差异性精细表征研究[J]. 东北大学学报(自然科学版), 2022, 43(4): 501-508. |
[4] | 丁山, 臧仕义, 曹殿明, 佘黎煌. 基于动态ID跳变的CAN总线安全调度算法[J]. 东北大学学报(自然科学版), 2022, 43(3): 350-358. |
[5] | 叶翠丽, 王娜, 庞硕, 闫航. 基于改进遗传算法的秸秆还田机刀片功耗优化[J]. 东北大学学报(自然科学版), 2021, 42(9): 1290-1298. |
[6] | 丁山, 暴林慧, 高梦宁, 佘黎煌. 一种基于安全性的CAN-FD信号打包方法[J]. 东北大学学报(自然科学版), 2021, 42(6): 775-781. |
[7] | 刘军, 杨青文, 王金涛, 刘华伟. 基于改进遗传算法的空间信息网恢复策略[J]. 东北大学学报(自然科学版), 2021, 42(4): 524-530. |
[8] | 裴玉龙, 杨世军, 潘恒彦. 考虑车内拥挤状态的公交弹性发车间隔优化[J]. 东北大学学报(自然科学版), 2021, 42(11): 1663-1672. |
[9] | 李壮年, 储满生, 柳政根, 李宝峰. 基于机器学习和遗传算法的高炉参数预测与优化[J]. 东北大学学报:自然科学版, 2020, 41(9): 1262-1267. |
[10] | 黄川, 胡平, 连静. 一种基于车载信号还原机动车道3D地图的大数据方法[J]. 东北大学学报:自然科学版, 2020, 41(6): 771-777. |
[11] | 刘芳, 刘欣怡, 苏卫星, 林辉. 电动汽车动力电池健康状态在线估算方法[J]. 东北大学学报:自然科学版, 2020, 41(4): 492-498. |
[12] | 王新刚, 徐馷悉, 李尚杰, 马瑞敏. 不确定结构的区间可靠性优化设计[J]. 东北大学学报:自然科学版, 2020, 41(4): 521-527. |
[13] | 张华伟, 郑晓涛. 基于遗传算法优化神经网络的拼焊板压边力预测[J]. 东北大学学报:自然科学版, 2020, 41(2): 241-245. |
[14] | 刘芳, 马杰, 苏卫星, 何茂伟. 基于模型参数在线辨识技术的SOC估算方法[J]. 东北大学学报:自然科学版, 2020, 41(11): 1543-1549. |
[15] | 茹敬雨, 贾子熙, 吴成东. 一种基于阳光的运动轨迹简化算法[J]. 东北大学学报:自然科学版, 2019, 40(8): 1070-1075. |
阅读次数 | ||||||||||||||||||||||||||||||||||||||||||||||||||
全文 58
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||
摘要 321
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||