XIE Hua-qing， ZHANG Jian-rong， YU Qing-bo， QIN Qin. Thermodynamic Analysis of Steam Reforming of Tar Component in Raw COG for Hydrogen Production[J]. Journal of Northeastern University Natural Science, 2016, 37(12): 1735-1739.
[1]Quitete C P B，Bittencourt R C P，Souza M M V M.Steam reforming of tar using toluene as a model compound with nickel catalysts supported on hexaaluminates ［J］.Applied Catalysis A:General，2004，478:234-240. [2]徐匡迪.中国钢铁工业的发展和创新［J］.钢铁，2008，43(2):1-13.(Xu Kuang-di.Iron and steel industy development and technological innovation in China ［J］.Iron and Steel，2008，43(2):1-13.) [3]沈培俊.焦炉煤气重整透氧膜研究及材料优化［D］.上海:上海大学，2011.(Shen Pei-jun.The research of oxygen-permeable membrane for reforming coke-oven-gas and optimization of membrane materials ［D］.Shanghai:Shanghai University，2011.) [4]Yang Z B，Zhang Y W，Wang X G，et al.Design of two-stage membrane reactor for the conversion of coke-oven gas to H2 and CO ［J］.Journal of Energy Chemistry，2014，23(4):411-413. [5]Onozaki M，Watanabe K，Hashimoto T，et al.Hydrogen production by the partial oxidation and steam reforming of tar from hot coke oven gas ［J］.Fuel，2005，85(2):143-149. [6]Cheng H W，Zhang Y W，Lu X G，et al.Hydrogen production from simulated hot coke oven gas by using oxygen-permeable ceramics ［J］. Energy & Fuels，2009，23(1):414-421. [7]Cheng H W，Lu X G，Liu X，et al.Partial oxidation of simulated hot coke oven gas to syngas over Ru-Ni/Mg(Al)O catalyst in a ceramic membrane reactor ［J］.Journal of Natural Gas Chemistry，2009，18(4):467-473. [8]Yan C F，Hu E Y，Cai C L.Hydrogen production from bio-oil aqueous fraction with in situ carbon dioxide capture ［J］.International Journal of Hydrogen Energy，2010，35:2612-2616. [9]杨军，汪学广，李林，等.Ni/MgO/Al2O3催化剂上以1-甲基萘为模型化合物高温焦炉煤气焦油的催化转化［J］.高等学校化学学报，2010，31(9):1841-1847.(Yang Jun，Wang Xue-guang，Li Lin，et al.Catalytic conversion of 1-methylnaphthalene as tar model compound from hot coke oven gas over Ni/MgO/Al2O3 catalysts ［J］.Chemical Journal of Chinese Universities，2010，31(9):1841-1847.) [10]Broda M，Manovic V，Imtiaz Q.High-purity hydrogen via the sorption enhanced steam methane reforming reaction over a synthetic CaO-based sorbent and a Ni-catalyst ［J］.Environmental Science & Technology，2013，47(11):6007-6014. [11]Xie H Q，Yu Q B，Wang K，et al.Thermodynamic analysis of hydrogen production from model compounds of bio-oil through steam reforming ［J］.Environmental Progress & Sustainable Energy，2014，33(3):1008-1016. [12]Xie H Q，Yu Q B，Wei M Q，et al.Hydrogen production from steam reforming of simulated bio-oil over Ce-Ni/Co catalyst with in continuous CO2 capture ［J］.International Journal of Hydrogen Energy，2015，40(3):1420-1428.(上接第1714页)了符合物理冶金规律的多钢种屈服强度预测模型.经统计，有94.21%的数据预测值与实际值绝对误差在±30MPa之内.采用MIV分析并验证了成分和工艺参数对屈服强度的影响规律.结果表明:随着碳含量的增加，屈服强度增大；随着终轧厚度和卷取温度的降低，屈服强度增大.
