Dynamic Reliability Analysis of Torque Shaft in Cutting Part of Coal Mining Machines
YANG Zhou1， JIANG Chao1， ZHANG Yi-min2， JIANG Hong-meng1
1. School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China;2. School of Mechanical Engineering， Shenyang University of Chemical Technology， Shenyang 110142， China.
YANG Zhou， JIANG Chao， ZHANG Yi-min， JIANG Hong-meng. Dynamic Reliability Analysis of Torque Shaft in Cutting Part of Coal Mining Machines[J]. Journal of Northeastern University Natural Science, 2020, 41(2): 217-222.
[1]Dewangan S，Chattopadhyaya S.Performance analysis of two different conical picks used in linear cutting operation of coal［J］.Arabian Journal for Science and Engineering，2016，41(1):249-265. [2]Dewangan S，Chattopadhyaya S.Wear assessment of conical pick used in coal cutting operation［J］.Rock Mechanics and Rock Engineering，2015，48(5):2129-2139. [3]Dewangan S，Chattopadhyaya S.Characterization of wear mechanisms in distorted conical picks after coal cutting［J］.Rock Mechanics and Rock Engineering，2016，49(1):225-242. [4]赵丽娟，陈鹏，宋朋.采煤机截割部振动特性分析及传动系统优化［J］.机械传动，2015，39(1):131-134.(Zhao Li-juan，Chen Peng，Song Peng.Vibration characteristics analysis and transmission system optimization of shearer cutting section［J］.Mechanical Transmission，2015，39(1):131-134.) [5]张义民，王婷，黄婧，等.采煤机摇臂系统行星轮系疲劳可靠性灵敏度设计［J］.东北大学学报(自然科学版)，2016，37(10):1426-1431.(Zhang Yi-min，Wang Ting，Huang Jing，et al.Fatigue reliability based sensitivity design of planet gear for shearer rocker arm system［J］.Journal of Northeastern University(Natural Science)，2016，37(10):1426-1431.) [6]赵伟.采煤机截割部扭振模态分析［J］.机械管理开发，2014(5):54-56.(Zhao Wei.Analysis of torsional vibration mode of shearer cutting department［J］.Mechanical Management and Development，2014(5):54-56.) [7]冷晓慧，杨兆建，王义亮.采煤机扭矩轴卸荷槽尺寸参数化设计［J］.煤炭技术，2015，34(3):239-241.(Leng Xiao-hui，Yang Zhao-jian，Wang Yi-liang.Parametric design of the dimensions of the unloading groove of the shearer torque shaft［J］.Coal Technology，2015，34(3):239-241.) [8]Peng R，Qin X Y.Modal analysis of crane girder based on ANSYS Workbench［J］.Advanced Materials Research，2014，951(10):58-61. [9]Wang L，Hofmann V，Bai F，et al.Modeling of coupled longitudinal and bending vibrations in a sandwich type piezoelectric transducer utilizing the transfer matrix method［J］.Mechanical Systems and Signal Processing，2018，108:216-237. [10]杨周.非正态分布参数的机械构件的可靠性灵敏度与可靠性设计［D］.沈阳:东北大学，2010.(Yang Zhou.Reliability-based sensitivity and reliability-based robust design for mechanical components with non-normal random variables［D］.Shenyang:Northeastern University，2010.) [11]Olsson A，Sandberg G，Dahlblom O.On Latin hypercube sampling for structural reliability analysis［J］.Structural Safety，2003，25(1):47-68. [12]Gomes H M，Awruch A M.Comparison of response surface and neural network with other methods for structural reliability analysis［J］.Structural Safety，2004，26(1):49-67. [13]Lu C M，Zhang Y M，Li H，et al.Frequency reliability and sensitivity analysis on the rotor system［J］.Applied Mechanics and Materials，2012，271/272:1296-1300.(上接第211页)(Feng Xiang-li，Wang Lei，Liu Yang.Effect of heat input on microstructure and tensile deformation behavior of Q460 steel weld joint［J］.Journal of Northeastern University(Natural Science)，2018，39(4):511-515.) [3]Wang X，Dong W C，Lu S P，et al.Effects of Ti-bearing inclusions on the microstructure and mechanical properties of MAG multilayer weld metal［J］.Acta Metallurgica Sinica(English Letters)，2012，25(1):1-9. [4]黄须强，王大伟，修世超.AISI304/低碳钢真空扩散焊接头组织和性能［J］.东北大学学报(自然科学版)，2017，38(12):1759-1763.(Huang Xu-qiang，Wang Da-wei，Xiu Shi-chao.Microstructure and performance of AISI304/mild steel vacuum diffusion bonded joint［J］.Journal of Northeastern University(Natural Science)，2017，38(12):1759-1763.) [5]Zhao B，Fang C L.Characteristics of the electrode melting phenomena in narrow gap MAG high-rotating-speed arc welding［J］.Rare Metals，2007，26(sup1):291-295. [6]Kolpakov A G，Rakin S I.Estimation of stress concentration in a welded joint formed by explosive welding［J］.Journal of Applied Mechanics and Technical Physics，2018，59(3):569-575. [7]Sinha V C，Kundu S，Chatterjee S.Microstructure and mechanical properties of friction stir welded joints between commercially pure copper and Al 6351 alloy［J］.Archives of Metallurgy and Materials，2017，62(3):1819-1825. [8]Yang L，Jiang X H，Wang X H.Study on welding process performance of HG70D high strength steel plate［J］.China Welding，2018，27(3):59-64. [9]Dong Y，Soares C G.Stress distribution and fatigue crack propagation analyses in welded joints［J］.Fatigue & Fracture of Engineering Materials & Structures，2019，42(1):69-83. [10]Ohji T，Tsuji Y，Miyasaka F，et al.Mathematical modeling of metal active gas(MAG)arc welding［J］.Journal of Materials Science & Technology，2001，17(1):167-168. [11]Haidemenopoulos G，Papadimitriou K.Retained austenite and mechanical properties in bainite transformed low alloy steels［J］.Steel Research，2016，66(10):433-438.
