Journal of Northeastern University Natural Science ›› 2016, Vol. 37 ›› Issue (7): 964-968.DOI: 10.12068/j.issn.1005-3026.2016.07.012

• Materials & Metallurgy • Previous Articles     Next Articles

Electrolytic Preparation of Al-Mg-La Master Alloys from MgCl2-KCl- AlF3-(La2O3) Molten Salt

JANG Pok-nam1,2, WANG Zhao-wen1   

  1. 1. School of Metallurgy, Northeastern University, Shenyang 110819, China; 2. Kim Chaek University of Technology, Pyongyang 999093, DPR of Korea.
  • Received:2015-05-11 Revised:2015-05-11 Online:2016-07-15 Published:2016-07-13
  • Contact: WANG Zhao-wen
  • About author:-
  • Supported by:
    -

Abstract: 0.6 wt% of La2O3 was dissolved in MgCl2-KCl-AlF3 molten salt system (with mass ratio of 41.5∶48.5∶10). Al-Mg-La master alloy was prepared by electrolysis process. Inductively coupled plasma-optical emission spectroscopy (ICP-OES) and X-ray diffraction (XRD) analysis were used to determine the composition and phases of the alloy. The results show that,the current efficiency can reach 86.2%, and the main alloy phases are α-Mg, β- Al12Mg17 and Al11La3 under the electrolysis conditions of 800℃ of electrolytic temperature, 6.92A/cm2 of cathode current density, 5.3~5.4V of the cell voltage, and 1 hour of electrolysis time. High cathode current density is helpful to increase the magnesium content in the alloy.

Key words: rare-earth La, Al-Mg-La master alloy, MgCl2-KCl system, MgCl2-KCl-AlF3-La2O3 molten salt, Al12 Mg17 phase

CLC Number: