Reliability Analysis of Wear Gradient of Automobile Parts
YANG Zhou1， HU Quan-quan1， ZHANG Yi-min2， GUO Bing-shuai1
1.School of Mechanical Engineering & Automation， Northeastern University， Shenyang 110819， China; 2.College of Mechanical Engineering， Shenyang University of Chemical Technology， Shenyang 110142， China.
YANG Zhou， HU Quan-quan， ZHANG Yi-min， GUO Bing-shuai. Reliability Analysis of Wear Gradient of Automobile Parts[J]. Journal of Northeastern University Natural Science, 2019, 40(3): 360-364.
[1]何在庚.机械动态与渐变可靠性理论与技术评述［J］.科技展望，2016(6):37.(He Zai-geng.Dynamic mechanical reliability theory and technique with gradients review ［J］.Science and Technology，2016(6):37.) [2]张义民.机械动态与渐变可靠性理论与技术评述［J］.机械工程学报，2013，49(20):101-114.(Zhang Yi-min.Dynamic mechanical reliability theory and technique with gradients review［J］.Journal of Mechanical Engineering，2013，49(20):101-114.) [3]Zhang Y M，Liu Q L.Practical reliability-based analysis of coil tube-spring ［J］.Journal of Mechanical Engineering Science，2002，216(C2): 179-182. [4]Zhang Y M，Liu Q L.Reliability-based design of automobile components ［J］.Journal of Automobile Engineering，2002，216(D6):455-471. [5]Yang Z，Zhang Y M，Zhang X F，et al.Reliability sensitivity-based correlation coefficient calculation in structural reliability analysis［J］.Chinese Journal of Mechanical Engineering，2012，25(3):608-614. [6]Jun K J，Park T W，Lee S H，et al.Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system［J］.International Journal Automotion Technology，2008，9(6):741-747. [7]Lee S B，Baik S，Yim H J.Optimal reliability design for thin-walled beam of vehicle structure considering vibration［J］.International Journal Automotion Technology，2003，4(3):135-140. [8]Melchers R E，Ahammed M.A fast approximate method for parameter sensitivity estimation in Monte Carlo structural reliability［J］.Computers & Structures，2004，82(1):55-61. [9]Zhang Y M，He X D，Liu Q L，et al.Reliability sensitivity of automobile components with arbitrary distribution parameters［J］.Journal of Automobile Engineering，2005，219(2):165-182. [10]Zhang Y M，Liu Q L，Wen B C.Reliability sensitivity of multi-degree-of-freedom uncertain nonlinear systems with independence failure modes［J］.Journal of Mechanical Science and Technology，2007，21(6):908-912. [11]陆克久.车用发动机金属零件磨损状态的判别研究［C］//2014中国汽车工程学会年会论文集.上海，2014:154-156.(Lu Ke-jiu.Research on metal part wear states discrimination of vehicle engine［C］//2014 China Automotive Engineering Society Annual Meeting Proceedings.Shanghai，2014:154-156.)(上接第349页) [8]Wu C Y，Yu H F，Zhang H F.Extraction of aluminum by pressure acid-leaching method from coal fly ash［J］.Transactions of Nonferrous Metals Society of China，2012，22(9):2282-2288. [9]Seidel A，Slusznv A，Shelef G，et al.Variation in fly ash properties with milling and acid leaching［J］.Fuel，2005，84(1):89-96. [10]Wu Y S，Xu P，Chen J，et al.Effect of temperature on phase and alumina extraction efficiency of the product from sintering coal fly ash with ammonium sulfate［J］.Chinese Journal of Chemical Engineering，2014，22(11/12):1363-1367. [11]Matjie R H，Bunt J R，Heerden J H P.Extraction of alumina from coal fly ash generated from a selected low rank bituminous south african coal ［J］.Mineral Engineering，2005，18(3):299-310. [12]张廷安，郑朝阵，吕国志，等.高铝粉煤灰制备氢氧化铝的比表面积及孔隙特性［J］.东北大学学报(自然科学版)，2014，35(10):1456-1459.(Zhang Ting-an，Zheng Chao-zhen，Lyu Guo-zhi，et al.Specific surface aera and pore characteristics of aluminum hydroxide prepared from high-alumina fly ash［J］.Journal of Northeastern University(Natural Science)，2014，35(10):1456-1459.) [13]Zhang R，Zheng S L，Ma S H，et al.Recovery of alumina and alkali in Bayer red mud by the formation of andradite-grossular hydrogarnet in hydrothermal process［J］.Journal of Hazardous Materials，2011，189(3):827-835. [14]Liu W C，Sun S Y，Zhang L，et al.Experimental and simulative study on phase transformation in Bayer red mud soda-lime roasting system and recovery of Al，Na and Fe［J］.Minerals Engineering，2012，39:213-218. [15]Li X B，Xiao W，Liu W，et al.Recovery of alumina and ferric oxide from Bayer red mud rich in iron by reduction sintering［J］.Transaction of Nonferrous Metals Society of China，2009，19(5):1342-1347. [16]柯家骏，张帆.拜耳法赤泥水热处理的渣物相的热力学分析［J］.化工冶金，1994，15(4):341-347.(Ke Jia-jun，Zhang Fan.Thermodynamical analysis on residue phases resulted from hydrothermal treatment of the Bayer red mud［J］.Engineering Chemistry & Metallurgy，1994，15(4):341-347.)
